Illuminated pushbutton actuator, classic, flat, maintained, 1 N/C, red, 24 V AC/DC, cable (black) with m8 plug, 4 pole, 1 m
Illuminated pushbutton actuator, RMQ compact solution, Complete unit, Design: Flat, maintained, Connection type: Cable (black) with M8 plug, 4 pole, Cable Length: 1 m, Colour LED: Red, button plate: red, Button plate Blank, Rated operational voltage LED: 24 V AC/DC, Name: None, Degree of Protection: IP66, IP67, IP69K (front), IP65 (on rear), Bezel: titanium, Connection to SmartWire-DT: no, Contacts N/C = Normally closed: 1 NC, Contacts Notes: = safety function, by positive opening to IEC/EN 60947-5-1, Actuator travel and actuation force as per DIN EN 60947-5-1, K.5.4.1: mm 4.65, Maximum travel: mm 5.7, Minimum force for positive opening: N 15, Positive opening (ZW): yes, Standards: IEC/EN 60947-5-1, VDE 0660
Delivery program
Product range
RMQ compact solution
Basic function
Illuminated pushbutton actuators
Single unit/Complete unit
Complete unit
Connection type
Cable (black) with M8 plug, 4 pole
Rated operational voltage LED
24 V AC/DC
Degree of Protection
IP66, IP67, IP69 (front)
IP65 (on rear)
Front ring
Bezel: titanium
Connection to SmartWire-DT
no
N/C = Normally closed
1 NC
Notes
= safety function, by positive opening to IEC/EN 60947-5-1
Actuator travel and actuation force as per DIN EN 60947-5-1, K.5.4.1
Minimum force for positive opening [ N]
15
Contact travel■ = Contact closed□ = Contact open
Technical data
Standards
IEC/EN 60947-5-1
VDE 0660
Certifications
CE, UL, CSA
Lifespan, mechanical [Operations]
> 1 x 106
Operating frequency [Operations/h]
≦ 3600
Plug tightening torque
0.6 N/m
Tightening torque Threaded ring
2 Nm
Climatic proofing
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Degree of Protection
IP66, IP67, IP69 (front)
IP65 (on rear)
Ambient temperatureOpen
-30 - +70 °C
Ambient temperatureStorage
- 30 - + 80 °C
Mounting position
As required
Mechanical shock resistance, shock duration 11 ms
> 30 g
Rated impulse withstand voltage [Uimp]
800 V AC
Rated insulation voltage [Ui]
30 V
Overvoltage category/pollution degree
III/3
Control circuit reliabilityAt 17 V DC/7 mA [HF]
N/C contact: statistically determined 1 failure per 0.9 × 106Operations
Max. short-circuit protective deviceFuse [gG/gL]
4 A
Rated conditional short-circuit current [Iq]
1 kA
Rated operational current [Ie]AC-1524 V [Ie]
4 A
Rated operational current [Ie]DC-1324 V [Ie]
3 A
Material characteristic
PUR
Design verification as per IEC/EN 61439
Operating ambient temperature min.
-30 °C
Operating ambient temperature max.
+70 °C
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Push button, complete (EC001028)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Push-button actuator, complete unit (
[email protected] [AKF046014])
Number of command positions
1
Construction type lens
Round
Suitable for illumination
Yes
Switching function latching
Yes
Number of contacts as normally open contact
0
Number of contacts as normally closed contact
1
Number of contacts as change-over contact
0
Type of electric connection
Other
Material front ring
Plastic
Degree of protection (IP)
Other
Degree of protection (NEMA)
Other
Approvals
Product Standards
IEC/EN 60947-5-1; UL 508; CAN/CSA-C22.2 No. 14-18 and No. 94.2-15; CE marking
UL Category Control No.
NKCR
North America Certification
UL listed, CSA certified
Degree of Protection
2, 12