B500-KV 2596207 CEMBRE CORDLESS HYDRAULIC CRIMPING TOOL

B500-KV is the first of a new generation of portable power tools battery, characterized by the feature that is further enhanced. B500-KV is suitable for the installation of electrical connectors in compression on the conductors, typically up to 240 mm^Two.

The new tool uses the set of matrixes, common to tools and heads from 50 kN to production in December. Equipped with Li-Ion 18 V 4 Ah which offer a greater capacity of the previous 14.4 V 3 Ah.

Higher compression speed and force developed thanks to the new hydraulic system two hydraulic speeds: the first rapid approach tool features in the second, slower power, when it begins the compression portion of the connector, thus ensuring optimum use of the available energy. With sensor maximum pressure safety valve, the first to ensure the greatest accuracy repeatability maximum pressure of the cycle, the second element as a redundant safety for the operator.

The oled display allows you to view various parameters, including:

• the force developed to verify the correct execution of the compression,
• the state of charge of the battery
• general operating information
• the cycles remaining before the maintenance.

The new design, the reduced weight and the balance of the masses promote the ease of handling during use; the body in plastic material, two-component, assures adequate mechanical protection in all operating conditions, thanks to its rigid structure and greater safety and comfort in the handling, thanks to the rubber inserts. The silence, the lighting of the working area achieved by led lights and the absence of vibration makes its use further comfortable.

The integrated memory card allows you to record the parameters relating to the cycles of compression to be performed (200,000 events) and you can transfer in a second time to a host computer through USB communication interface.

Kit consists of:

• Basic tool with battery,strap
• Spare battery
• Battery charger
• Case suitable for storage of 20 pairs matrices

Aircraft noise

(Directive 2006/42/EC, annexe 1, point 1.7.4.2, letter u)

• The sound pressure level equivalent continuous A-weighted in the workplace L_pA
  is equal to73 dB (A)
• The maximum value of the instantaneous sound pressure C-weighted in the workplace L_pCpeak
  is less than< 94,5 dB (C)
• The sound power level emitted by the machine L_WA
  is equal to79 dB (A)

Risks due to vibration

(Directive 2006/42/EC, annexe 1, point 2.2.1.1)

Surveys conducted according to the indications of the standard UNI ENV 25349 and UNI EN 28662 part 1st, in the terms of use widely representative than those normally found, certify that the weighed root mean square, in frequency of the acceleration the upper limbs are exposed, for each biodynamic reference axis, is 0,575 m/s^Two.

VERSION ISOLATED: The field of application and the accessories for the compression are the same version, but not isolated.