Selected parameters TYPE Wireless HOUSING Decentral POWER SUPPLY Battery Others TYPE Window sensor HOUSING Wall mounting, 60x30x15 mm POWER SUPPLY Battery 2450 MAIN CHARACTERISTICS Wireless window sensor with additional input
SHmDWaWrIStENDupline® Wireless window sensor Type SHDWWISEN • Wireless window sensor for building automation application • Temperature range: -20 to +50°C • Battery supplied with a lifetime up to 5 years • Standby mode to save battery • Wireless transmission based on IEEE 802.15.4, at 2.4 GHz • Door/window opening detected through sensor’s body and a magnet separation Product DescriptionOrdering Key SH DW WISEN IN1 The SHDWWISENxxx win- dow sensor is a wireless, battery powered reed sen- sor. Each time its two parts, i.e. the sensor’s body and a magnet, are separated, a radio signal is sent. In addition the part number SHDWWISENIN1 supports one potentialfree input. This window sensor is designed for usewith scenes in home/building automation, alarms and everywhere else where infor- mation related to opening / closing of doors, windows, garage gates, etc is needed. It is fully programmablevia the SH tool and must always becoupledtoa SH2WBU230 module. Smart house Wireless Window sensor Digital input Type Selection Additional inputColourLEDs Battery supplied 1 voltage free White 1 red / 1 blueSHDWWISENIN1 White 1 red / 1 blueSHDWWISEN InputSpecifications ContactReed contact Max distance between sensors and magnet 25 mm (can be lower if the magnet is not aligned with the led) Additional input SHDWWISENIN1 voltage free Output Specifications LED 1 red / 1 blue Supply Specifications Power supply Supplied by battery, type Lithium button 2450 3V Average battery lifetime5 years General Specifications Address assignment Automatic: the control- ler recognises the module through the SIN (Specific Identification Number) that is fitted in the SH tool Environment Degree of protection IP 20 Pollution degree 3 (IEC 60664) Operating temperature -20° to +50°C (-4° to 122°F) Storage temperature -30° to +60°C (-22° to 140°F) Humidity (non-condensing)20 to 80% RH Housing Sensor60 x 30 x 15.5 mm Magnet32 x 10.2 x 11.5 mm Mounting With double-side tape and screws. Screws are not included in the scope of the delivery. Weight50 g CE MarkingYes Specifications are subject to change without notice (11.09.2014)1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.