Selected parameters TYPE Environmental sensor HOUSING Wall mounting POWER SUPPLY Bus-powered Others TYPE Environmental sensor HOUSING Wall mounting POWER SUPPLY Bus-powered MAIN CHARACTERISTICS T/%RH sensor with display
Smart Dupline® CO2, Temperature and Humidity Sensors w. Display Type SHSUXXXXD • Bus-powered CO2, temperature and humidity sensors • Wall mounting • CO2 measuring range: 0 to 2000 ppm • Temperature measuring range: -20 to 50 °C • Humidity measuring range: 0 to 100 %RH • LCD Display for showing measured values • Touch function to activate back-lighting and change signal type • Low current consumption • Easy installation • Smart Dupline®protocol Product Description Ordering Key SH SU CO T H D TheSHSUXXXXD lineare bus-powered roomsensors forwall-mounting.They are available in different combina- tions of CO2, temperature and relative humidity. The sensors have a LCD display for show- ing the measured values. By activating the touch button in the front the LED backlight is turned on and the signal type to be shown can be changed. The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-droppedvia the same Dupline®2-wire bus, thereby simplifying the wiring to the controller significantly. The address assignment and the setup of the display oper- ating mode are performed over the bus by using the SBWEB/SHWEB PC-based programming tool. Smart Dupline® Sensor CO2 Temperature Humidity Display Type Selection Module typeIndication Supply: Bus-powered CO2 + TemperatureDisplay SHSUCOTD CO2 + Temperature + Humidity Display SHSUCOTHD Temperature + Humidity Display SHSUTHD Temperature Display SHSUTD Supply Specifications Power SupplySupplied by Dupline® Power on delay ≤ 3 s Dupline® Specifications Inputspecifications CO2 Measurement principle Non-Dispersive Infrared Technology (NDIR) Sensing element E+E Dual Source Infrared System Signal range 0 to 2000 ppm Accuracy Voltage8.2 V Maximum Dupline® voltage10 V Minimum Dupline® voltage 5.5 V Maximum Dupline® current SHSUCOTD10 mA SHSUCOTHD 10 mA SHSUTHD 5 mA SHSUTD 5 mA (@ 25°C and 1013mbar) < ± (50ppm +2% of meas- uring value) Response time Typ 300 s Temperature dependenceTyp. 2ppm CO2/°C (0...50°) Long term stabilityTyp. 20ppm / year Temperature Signal range -20 to 50 °C Inaccuracy+/-0,5°C Sample rate5 s Humidity Signal range 0 to 100 %RH Inaccuracy30%..70% : +/-3% 0%..100%: +/-5% Sample rate5 s Specifications are subject to change without notice (06.01.2014)1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.