BTM-T7-24 CARLO GAVAZZI Selected parameters TYPE Display POWER SUPPLY DC Others TYPE Touch Screen POWER SUPP..

SmartHUB
Home Automation Touchscreen and Energy Data Logger
Types BTM-T7-24, BTM-T4-24
• High definition 7” and 4.3” colour touchscreen
• Easy setup of graphic pages and functions with the powerful software Wizard
• Remote access
• Activation of internet links through touch buttons
• Alarms management
• Support viewing from IP cameras
• Ready for Modbus TCP/IP
• Gateway KNX/EIB by means of a plug-in module
BTM-KNX
BTM-T7-24BTM-T4-24
Product Description
Ordering Key
BTM-T7-24
SmartHUB is a completely configurable touch display. It is available in two versions,
7’’ and 4.3’’ wide, featuring a bright TFT widescreen (16:9) displaywithLED backlight. By means of the configura- tionsoftware,theinstaller can create his own HMI
RTU orfrominverterswith Modbus RTU communica- tioncapability. Itoffersa wide range of analysis options: daily, monthly and annual graphs,relative and absolute yields, monetary yields, etc.
Home/Building automation
Display
Inches
Power supply
Type Selection
Active display area ResolutionSupply: 24 VDC
interface or adaptthe tem-
Connected via Modbus
plate downloadable from the CarloGavazziwebsite, definetheelectricalvalues he needs to show/log,con- figure any Modbus RTU device very easily by just reading a csv file, read the
TCP/IP to the Carlo Gavazzi smart-house controller, SmartHUB is an elegant interfacewhichcancontrol all the home automation functions such as lights, scenarios, temperature,
7” diagonal 800 x 480 pixelBTM-T7-24
4.3” diagonal480 x 272 pixelBTM-T4-24
Optional Plug-in *
Module typeApplication Module
smart-house configuration
rollerblinds, alarms,… and
file and link the smart-house variable to images/pushbut- ton.
Energy monitoring SmartHUBshowsand logs the data collectedfrom our EnergyMeteronModbus
can give information about everything that is happening in a house.
* Optional plug-in BTM- KNX provides a gateway betweenSmartDupline and KNX/EIB bus.
External plug-inKNX/EIBBTM-KNX
Supply Specifications
Power supply voltage24 VDC (18 to 30 VDC) BTM-T7-24 24 VDC
BTM-T4-24 24 VDC
BTM-KNX By BTM-Tx-24
Specifications
Operating SystemWindows CE 6.0
Display
Type TFT Resolution
Current consumption 0.7 A at 24 VDC (max.)
CPU ARM, 600 MHz User Memory128 MB Flash RAM 256 MB DDR
Active display area
T7800 x 480 pixel
T4480 x 272 pixel
T77” diagonal
T44.3” diagonal
Front Panel
Touch screen Analogue resistive
System LEDs 1
COM PortsRS-232,RS-485,RS-422 software configurable
Colours64K BacklightLED
Brightness150 cd/m2 typ. Dimming Yes
Ethernet Port2 10/100 Mbit with integrated switch
USB Port 1 host interface, version 2.0
Specifications are subject to change without notice(22.04.2014)1