Selected parameters TYPE Controller HOUSING DIN-rail POWER SUPPLY AC Others TYPE Controller HOUSING H8 (W144) POWER SUPPLY 10-30 VDC MAIN CHARACTERISTICS Programmable smart-house controller RS232/RS485 snd with built-in GSM modem
smart-house Controller BH8-CTRLZ, BH8-CTRLZG Programmable smart-house controller Option for built-in GSM Modem for monitoring and control via SMS User-friendly configuration via Windows 98/2000/NT/XP software Real-time, timer and logic functions Analog set-point control and monitoring Light and Rollerblind control functions Alarm Monitoring Option for Radio controlled clock for high real time accuracy 2 x RS232 ports for configuration and smart-house data read/write 1 x RS485 port for networking of up to 32 smart-house controllers Modbus-RTU protocol 4 digital inputs / 4 digital outputs on-board H8-housing for DIN-rail mounting (EN50022) AC or DC power supply INPUT/OUTPUT SPECIFICATIONS Serial PortRS 232 COM 1115 kBaud COM 29600 Baud, adjustable Data format 8 bit COM 1, COM 2No parity 1 stop bit 9-pole female SUB-D Pin assignment TxD Pin 2 RxD Pin 3 GND Pin 5 Dielectric voltage Com.port - smart-house ≥ 2 kVAC (rms) Protocol Modbus-RTU RS 485Termination Pin 27When in use, connect to pin 31 Fs-B Pin 28When in use, connect to pin 30 Fs-A Pin 29When in use, connect to pin 31 + (B) Pin 30 - (A) Pin 31 GND Pin 32 V+ Pin 33*) Protocol Modbus-RTU smart-house Output smart-house carrier Output voltage 8.2 V Current< 130 mA Short-circuit protectionYes Sequence time 32 channels 38.6 ms 128 channels 132.3 ms Digital outputs 4 PNP transistors FunctionProgrammable Output voltage VDD≤ 35 VDC Output current ≤ 100 mA Output voltage drop≤ 2 V Off-state leakage current≤ 100 µA Short-circuit protectionNone Built-in protective diodes None Dielectric voltage Output - smart-house ≥ 4 kVAC (rms) Output - Input 200 V Inductive loadsExternal noise suppression required Inputs Digital 6 - 30 VDC VoltageON > 5.5 V OFF < 1.5 V Current≤ 6 mA Dielectric voltage Input - smart-house ≥ 4 kVAC GSM Modem Siemens cellular engine TC35 Dual Band EGSM900 and GSM1800 Output powerClass 4 (2 W) EGSM900 Class 1 (1 W) GSM1800 Antenna connectorFME *) V+ and GND may be usedas supply for digital I/O’s, if RS 485 is not used. GENERAL SPECIFICATIONS Real-time clock Accuracy Better than ± 1 minute/month Internal back-up time Typ. 48 hours Power ON delay< 2.5 s Indication for Supply ONLED, green ON LineLED, yellow COM 1LED, red COM 2LED, red RS 485 LED, red GSMLED, red Environment Degree of protectionIP 20 Pollution degree 3 (IEC 60664) Operating temperature 0° to +50°C (+32° to +122°F) Storage temperature -20° to +85°C (-4° to +185°F) Humidity (non-condensing)20 to 80% RH Mechanical resistance Shock15 G (11 ms) Vibration 2 G (6 to 55 Hz) Housing H8-housing Weight 640 g Specifications are subject to change without notice (31.10.2008) - A product of the CARLO GAVAZZI Group
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.