Selected parameters SYSTEM Through-beam HOUSING Ø10 - Ø20 SENSING RANGE 6 ... 20 m CONNECTION Cable OUTPUT DC PNP MATERIAL Plastic Others SENSING RANGE 15 m HOUSING Ø12 (12,5) x 28,8 mm MATERIAL PC + PE12
Photoelectrics Through-beam, Transistor Output Type PE12C.T15.. • Elevators, Escalators and Entrance control • Range 15 m • Modulated, infrared light • Supply voltage: 10 to 30 VDC • Output: 100 mA, NPN or PNP type • Make or break switching • LED for output indication or power supply • Protection: reverse polarity, short circuit, transients • Cable versions with or without connector • Emitter mute and power adjustment • High neighbour immunity, 3-codes • CE, UL325 and UL508 approved Product Description Ordering Key PE12C1T15NO-C2 The PE12CNT. is a family of general purpose Photoelec- tricsensors. They are specially designed for Elevators, Escalators, Entrance control to meet the requirements in the door market. The “snap-on” housing can be mounted withawallthicknessfrom 0.6 mm to 2.25 mm. The emitter has a mute input to turnitoffforevaluation of the sensor function. Theemitterandreceivers can be delivered in 3 differ- ent codeson orderto improve neighbour immunity. Available in 10-30 VDC version. Type Housing styleh Housing size Housing material Sensor code Detection principle Sensing distance Output type Output configuration Connection type Cable connector Type Selection Housing Range Con-Ordering no. Ordering no. Ordering no. Ordering no. Ordering no. diameter Snnec- Receiver Receiver Receiver Receiver Emitter torNPN, NO NPN, NC PNP, NOPNP, NC Ø 12 mm Code 115 mNO PE12C1T15NO PE12C1T15NC PE12C1T15PO PE12C1T15PC PE12C1T15 Ø 12 mm Code 215 mNO PE12C2T15NO PE12C2T15NC PE12C2T15PO PE12C2T15PC PE12C2T15 Ø 12 mm Code 315 mNO PE12C3T15NO PE12C3T15NC PE12C3T15PO PE12C3T15PC PE12C3T15 Ø 12 mm Code 115 mYES PE12C1T15NO-C2 PE12C1T15NC-C2 PE12C1T15PO-C2 PE12C1T15NC-C2 PE12C1T15-C2 Ø 12 mm Code 215 mYES PE12C2T15NO-C2 PE12C2T15NC-C2 PE12C2T15PO-C2 PE12C2T15NC-C2 PE12C2T15-C2 Ø 12 mm Code 315 mYES PE12C3T15NO-C2 PE12C3T15NC-C2 PE12C3T15PO-C2 PE12C3T15NC-C2 PE12C3T15-C2 Note: Please order emitter and receiver separately Specifications Emitter Rated operational volt. (UB)10 to 30 VDC Ripple (Urrp) £ 10% Supply current £ 20 mA ProtectionReverse polarity, transients Control input Normal oper. > 1.5 VDC Mute < 1.2 VDC Light sourceLED, 880 nm Light type Infrared, modulated Optical angle ± 5° Indication function Power supply ON LED, green Mute input ONLED, green flashing Power adjustment Rx ~ 3 kΩ -10 kΩ 0 - 100%, in 20 step Specifications are subject to change without notice (17.11.2011) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.