Selected parameters SYSTEM Sensor HOUSING M30 SENSING RANGE >3 m CONNECTION M12 plug DC OUTPUT NPN + 4...20 mA DC MATERIAL Plastic Others HOUSING M30 (Ø39) x 89.5 mm SENSING RANGE 6 m MATERIAL Thermoplastic polyester
Ultrasonic Diffuse, Analogue and Digital Output Types UA30CAD60....TI • Cylindrical M30 with Ø40 front and PBT housing • Sensing distance: 350-6000 mm • Power supply: 12 (15) to 30 VDC • Outputs: 0-10 VDC or 4-20 mA and one switching output NPN or PNP. • Linearity error 1% • Repeatability 1% • Beam angle. ±7° • Protection: Short-circuit, reverse polarity and overvoltage • Protection degree IP 67, Nema 4X • 2 m cable or M12 plug Product Description Ordering Key UA30CAD60NGM1TI A family of diffuse ultrasonic sensors with sensing ranges from350-6000mmwitha resolution as low as 15 mm. The sensor contains both an analogue and a digital output. The output is either 0-10V or 4-20 mA and the digital output NPN or PNP, NO or NC which formsa windowsdetection. The sensor is the ideal choice for distance measurement, level measurement, diameter measurement or loop control. Due to use of microproces- sor control the digital filtering makes the sensor immune to most electromagnetic inter- ferences. Ultrasonic sensor Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type Output configuration Connection Teach-in Type Selection Housing Connec-Rated operatingAnalog Digital outputOrdering no. diameter tiondist. (Sn) OutputNPN/PNP M30 Plug M12 350-6000 mm 4-20 mANPNUA 30 CAD 60 NG M1 TI M30 Cable 350-6000 mm 4-20 mANPNUA 30 CAD 60 NG TI M30 Plug M12 350-6000 mm 0-10 V NPNUA 30 CAD 60 NK M1 TI M30 Cable 350-6000 mm 0-10 V NPNUA 30 CAD 60 NK TI M30 Plug M12 350-6000 mm 4-20 mAPNPUA 30 CAD 60 PG M1 TI M30 Cable 350-6000 mm 4-20 mAPNPUA 30 CAD 60 PG TI M30 Plug M12 350-6000 mm 0-10 V PNPUA 30 CAD 60 PK M1 TI M30 Cable 350-6000 mm 0-10 V PNPUA 30 CAD 60 PK TI Specifications Rated operating distance (Sn)Reference target: 1 mm metal rolled finish, size 200 x 200 mm 350 - 6000 mm Blind zone≤ 350 mm Repeatability 1% Linear Accuracy1% Beam angle ±7˚ Sensitivity Push-buttonP1 (longest setpoint) P2 (shortest setpoint) Resolution2 mm Temperature drift ±5% Temperature compensationYes Hysteresis (H)Min. 2.0% Rated operational voltage (UB) NG or PG versions 12 to 30 VDC NK or PK versions15 to 30 VDC (ripple included) Ripple (Urpp)≤ 5% No-load supply current (Io)50 mA @ UB max Output current continuous digital output (Ie) Max. load capacity 100 nF300 mA Output current short-time digital output (I) Max. load capacity 100 nF300 mA Minimum operational current digital output (Im)0.5 mA OFF-state current digital output (Ir) 10 μA Specifications are subject to change without notice (12.05.2014) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.