Dimmer, 2 Outputs, 1 to 10 V BH4-D10V2-230 Switching and dimming of adjustable ballasts 1 to 10 V 8 control-channel receiver For DIN-rail mounting LED-indications for alarm, smart-house carrier and output Bulb-conserving soft-start function Channel coding by BGP-COD-BAT 4 lighting scenes Transmits the status of the dimming outputs OUTPUT SPECIFICATIONS Ballast outputs 2 Dimming capacity 2 x 1 to 10 V Max. load capacity50 mA on each output Dimming speed 3.6 s (10% - 100%) Relay outputs 2 Max. switching voltage250 VAC Resistive loadsAC1 16A Response time1 cycle: ≤ 272 ms @ 128 channels) SUPPLY SPECIFICATIONS Power Supply Rated operational voltage230 VAC ±10% Power consumption 2 VA Power dissipation Max. 4.5 W Frequency50/60 Hz TYPE SELECTION SupplyOrdering no. 230 VAC BH4-D10V2-230 GENERAL SPECIFICATIONS Power ON delay1 s Indication for Power OnLED, Green smart-house carrierLED, Yellow Output On LED, Red (one per output) Humidity (non-condensing)Max. 85% Housing H4-housing Standards IEC 60669, EN 55022/ EN 50081-1 and EN 55024/ EN 50082-1 Environment Operating temperature 0° to +50°C/32° to +122°F WIRING DIAGRAM DIMENSIONS (mm) D+ 2 VA D- +-+- 1234 5 678 Output Dimmer 1 Output Dimmer 2 1 2 21 22 23 2425 262728 L N Specifications are subject to change without notice (05.11.2009) - A product of the CARLO GAVAZZI Group
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.