Selected parameters MODULE TYPE Serial interface HOUSING DIN-rail I/O TYPE Serial protocol NUMBER OF I/O 0 Others MODULE TYPE RS232/RS485 interface I/O TYPE LG-K10S PLC protocol MAIN CHARACTERISTICS DIN-rail serial RS232/RS485 interface with LG-K10S PLC protocol, channel generator
Dupline® Plug & Play Master Module Interface forLuckyGoldstar PLC Type G 3496 0001 • Lucky Goldstar master • Plug and play: Automatic communication with specific PLC/Controllers • Built-in normal Dupline® Channel Generator • 128 I/O’s and DC power supply on 3 wires • RS232/RS422/RS485 port for interfacing to control sys- tem • Split-I/O mode selectable (128 inputs and 128 outputs) • LED-indications for supply, Dupline® carrier and Com- port Tx • Galvanically isolated Com-port supplied by internal DC/ DC converter Product DescriptionOrdering Key G 3496 0001 700 G34960001isdesigned as a cost-effective Plug & Play solution for interfacing Dupline®I/O’s to a Lucky Goldstar PLC. It performs three functions: Dupline® channel generator, power supply synchronization (enables 3-wire system with supply) and RS232/RS422/ RS485 interface. Type: Dupline® H4-Housing Combined module Interface type DC supply Type Selection SupplyPLC Interface type Ordering no. 20-30 VDCLucky Goldstar K-serieG 3496 0001 700 Input/Output Specifications Power output Output voltage20-30 VDC (pulsating) Output current< 3.0 A @ 50ºC Short circuit protection 4 A quick acting fuse Output voltage drop < 1.0 V Dupline®carrier Output voltage8.2 V (pulsating) Current < 60 mA Short circuit protection Yes Scan time 128 channels132.2 ms 64 channels 69.8 ms Communication port Standard RS232/RS422/RS485 Split I/O modeYes, selectable Normal Dupline modeYes, selectable Connection 9 pole female Sub-D Dielectric voltage Com-port Dupline® 1 kVAC (rms) ProtocolLG Serial Communication Standard Baud rate19200 Data bits 8 Start bit 1 Stop bit 1 ParityNone Flow-controlNone Input/Output Specifications (Cont.) Pin assignment 2-wire RS 485 S/R Data line + (B)Pin 3 S/R Data line - (A) Pin 8 GND Pin 5 4-wire RS 485/RS 422 R Data line + (B)Pin 3 R Data line - (A) Pin 8 S Data line + (B)Pin 2 S Data line - (A) Pin 7 Direction Pin 4 (Connect to GND pin 5 when using 4-wire communication) RS 232 TXPin 1 RXPin 9 GND Pin 5 Supply Specifications Power supplyOvervoltage cat. III (IEC 60664) Operational voltage (Vin) 20-30 VDC Reverse polarity protectionNone Current consumption< 150 mA + Power load Power dissipation < 5 W Transient protection voltage800 V Dielectric voltage Supply - Dupline® None Supply - com-port1 kVAC (rms) Note: Use individual power supplies for all G349600xx700, as the input are not galvanic isolated from each other. Specifications are subject to change without notice (02.12.2014)1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.