The indicated delivery times are from the reopening of our warehouses that will be closed for holidays from 14/08/2017 to 25/08/2017.
Selected parameters MODULE TYPE Serial interface HOUSING DIN-rail I/O TYPE Serial protocol NUMBER OF I/O 0 Others MODULE TYPE RS232/RS485 interface I/O TYPE Toshiba PLC protocol MAIN CHARACTERISTICS DIN-rail serial RS232/RS485 interface with Toshiba PLC protocol, channel generator
Dupline Plug & Play Master Module Interface forToshiba Type G 3496 0011 • Plug and play: Automatic communication with specific PLC/Controllers • Built-in normal Dupline Channel Generator • 128 I/O’s and DC power supply on 3 wires • RS232/RS422/RS485 port for interfacing to control system • Split-I/O mode selectable (128 inputs and 128 outputs) • LED-indications for supply, Dupline carrier and Com-port Tx • Galvanically isolated Com-port supplied by internal DC/DC converter Product Description Ordering KeyG 3496 0011 700 G 3495 0011 is designed as a cost-effective solution for interfacingDupline I/O’sto a ToshibaPLC. Itperforms threefunctions: Dupline channel generator, power supply synchronization (enables 3-wiresystemwith supply) and RS232/RS422/ RS485 interface. Type: Dupline® H4-Housing Power supply Type Selection SupplyPLC Interface ConformanceOrdering no. 20-30 VDCToshiba T-series PLCsG 3496 0011 700 Input/Output Specifications Input/Output Specifications (cont.) Power Output Output voltage20-30 VDC (pulsating) Output current< 3.0 A @ 50°C Short circuit protection 4 A quick-acting fuse Output voltage drop< 1.0 V Dupline carrier Output voltage8.2 V (pulsating) Current<60 mA Short circuit protection Yes Scan time 128 channels132.2 ms 64 channels69.8 ms Communication Port Standard RS232/RS422/RS485 Split I/O mode Yes, selectable Normal Dupline mode Yes, selectable Connection 9 pole female Sub-D Dielectric voltage Com-port Dupline 1 kVAC (rms) ProtocolComputer-Link Station no.01 Baud rate9600 (Toshiba Default) / 19200 Data bits 8 Start bit 1 Stop bit 1 ParityOdd Flow-controlNone Pin assignment 2-wire RS485 S/R Data line + (B) 3 S/R Data line – (A) 8 GND 5 4-wire RS485/RS422 R Data line + (B) 3 R Data line - (A)8 S Data line + (B) 2 S Data line - (A)7 Direction 4 (Connect to pin 5 GND when using 4-wire com.) RS232 TX 1 RX9 GND 5 Supply Specifications Power supplyOver voltage cat. III (IEC 60664) Operational voltage (Vin)20-30 VDC Reverse polarity protection None Current consumption< 150 mA + Power load Transient protection voltage 800 V Dielectric voltage Supply – DuplineNone Supply – Com-port 1 kVAC (rms) Note: Use individual power supplies for all G349600xx700, as the input are not galvanic isolated from each other. Specifications are subject to change without notice (05.12.2014)1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.