Selected parameters MODULE TYPE Output module HOUSING DIN-rail POWER SUPPLY DC I/O TYPE Analog DIN signal NUMBER OF I/O 4 Others MODULE TYPE Output module HOUSING H4 (W72) I/O TYPE 0-20 mA, 4-20 mA, 0-10 VDC POWER SUPPLY 10-30 VDC MAIN CHARACTERISTICS Universal analog output module with 4 DIN signal outputs
Universal Analog Output Module for DIN-Signals Type G 3439 6470 Duline® FieldbusInstallationbus • 4 analog outputs • Outputs individually configurable for 0-20 mA, 4-20 mA or 0-10 VDC • Selectable resolution: 1/1999 or 1/255 of full scale • Selectable dataformat : 8-bit, AnaLink or 3 1/2 digit BCD • EMC immunity according to EN50082-2 (industrial envi- ronment) • DIN-rail mounting (EN 50022) • Address-selection through rotary switches • LED-indication for supply and Dupline® carrier • LED-indication for invalid switch setting and faulty received data • Watchdog output for faulty received data • H4 housing Product Description Ordering Key G 3439 6470 024 Dupline®4 output universal analog output module with internalsupply.The module receives signals on a digital format from Dupline®and converts them to analog out- puts. The output type can be selectedas0-20mA,4-20 mA or 0-10 VDC for each output individually making a mix of analog output types on the same module possible. The transmissionformaton Dupline® can be selected to fit the output module into existing installations, or simp- lytouse themostsuitable combination of resolution, signalling capacity and speed. The formats are: 8-bit binary, AnaLink and 3 1/2 digit BCD (with or without multiplexing). Type: Dupline® H4-housing Receiver No. of channels Output type Power supply Type Selection SupplyOrdering no. 24 VACG 3439 6470 024 115 VACG 3439 6470 115 230 VACG 3439 6470 230 10-30 VDCG 3439 6470 800 Output Specifications Outputs set to voltage Outputs set to current Signal Signal output DIN-voltage output DIN-current output Signal range0-10 VDC 0-20 mA / 4-20 mA Output load ≥ 100 kΩ 0-450 Ω Short circuit protectionYes Yes Watchdog output≤ 30 V≤ 50 mA Resolution A/D11 bits or 8 bits11 bits or 8 bits Transmission 1/1999 or 1/255 1/1999 or 1/255 Output settling time≤ 0.5 sec. ≤ 0.5 sec Inaccuracy (11-bit) (ref. temp. 25°C) < 0.4% of full-scale< 0.4% of full-scale < 0.2% of reading< 0.2% of reading < 1 count< 1 count Temperature influence (ref. temp. 25°C) < ±15 ppm/K of full-scale< ±15 ppm/K of full-scale < ±150 ppm/K of reading < ±150 ppm/K of reading Recommended cable length < 25 m < 25 m Dielectric voltage Output - Dupline® 250 VAC (rms) 250 VAC (rms) Output - Watchdog output2 kVAC (rms) 2 kVAC (rms) Specifications are subject to change without notice (22.01.2007)1 Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.