G34910000230 CARLO GAVAZZI Selected parameters MODULE TYPE Interface/Gateway HOUSING DIN-rail POWER SUPPLY A.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

G34910000230 CARLO GAVAZZI Selected parameters MODULE TYPE Interface/Gateway HOUSING DIN-rail POWER SUPPLY A..

G34910000230

CARLO GAVAZZI

Selected parameters MODULE TYPE Interface/Gateway HOUSING DIN-rail POWER SUPPLY AC I/O TYPE None NUMBER OF I/O 2 Others MODULE TYPE Serial optical interface HOUSING H4 (W72) I/O TYPE None POWER SUPPLY 230 VAC MAIN CHARACTERISTICS AC-powered serial optical interface with optolink protocol

More details


Home > CARLO GAVAZZI

* Brand new product in its original packaging covered by the warranties and certifications provided by CARLO GAVAZZI

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

More info



Fiber Optic Interface
Type G 3491 0000
Duline®
FieldbusInstallationbus
• Dupline® to fibre optics interface
• Computer to Dupline® network access
• Fibre optic LAN-ring for up to 63 Dupline® systems
• Galvanic isolation 4000 VAC
• Watchdog output
• For mounting on DIN-rail (EN50022)
• LED-indications for supply, Dupline® and fail
• AC power supply
Product Description Ordering Key
G 3491 0000 230
Dupline®interface for signal transmission via fibre optics. For applications in environ- mentswithhigh noise tran-
sients, for signal transmission in explosive areas or for con- nections of up to 63 auto- nomous Dupline®installations in a fibre optics LAN.
Type: Dupline® Type number Power supply
Type Selection
Supply Ordering no.
24 VAC G 3491 0000 024
115 VACG 3491 0000 115
230 VACG 3491 0000 230
Input/Output Specifications
Fibre optics interface
Material Polymer
TypeDtep-index
Max. loss220 dB/km (660 nm) Typical loss 190 dB/km (660 nm) Numerical aperture 0.47
Dimensions 2.2 ± 0.1 mm Cable length £ 50 m Connector type 2 sockets
Hewlett Packard types HFBR-4513 (blue) HFBR-4503 (black)
Output1 NPN transistor FunctionWatchdog Output voltage£ 35 VDC
Output current£ 100 mA Output voltage drop £ 2 V
Off-state leakage current£ 100 µA Short-circuit protection None Built-in protective diodes None Dielectric voltage
Output - Dupline® ³ 4 kVAC (rms)
Inductive loads External noise suppression required
Settings
Device no. 6 DIP-switches
Baudrate DIP-switch
Test mode DIP-switch
Supply Specifications
Power supplyOvervoltage cat. III (IEC 60664) Rated operational voltage
through term. 21 & 22 230 230 VAC ± 15% (IEC 60038)
115 115 VAC ± 15% (IEC 60038)
024 24 VAC ± 15% (IEC 60038) Frequency 45 to 65 Hz
Rated operational powerTyp. 3 W Power dissipation£ 4 W Rated impulse withstand
voltage230 4 kV
115 2.5 kV
024 800 V Dielectric voltage
Supply-RS232C ³ 4 kVAC (rms)
General Specifications
Power ON delay< 200 ms
Indication for
Supply ONLED, green Dupline®carrierLED, yellow FailLED, red
Environment
Degree of protection IP 20
Pollution degree 3 (IEC 60664)
Operating temperature 0° to +50°C (+32° to +122°F) Storage temperature-20° to +85°C (-4° to +185°F)
Humidity (non-condensing) 20 to 80% RH
Mechanical resistance
Shock15 G (11 ms) Vibration 2 G (6 to 55 Hz)
Dimensions
Material
(see "Technical Information")H4-housing
Weight250 g
Specifications are subject to change without notice (30.04.03)1
Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.