GTI50 CARLO GAVAZZI Selected parameters MODULE TYPE Interface/Gateway HOUSING Decentral POWER SUPPLY DC I/O.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

GTI50 CARLO GAVAZZI Selected parameters MODULE TYPE Interface/Gateway HOUSING Decentral POWER SUPPLY DC I/O..

GTI50

CARLO GAVAZZI

Available

Ship on today

Selected parameters MODULE TYPE Interface/Gateway HOUSING Decentral POWER SUPPLY DC I/O TYPE None NUMBER OF I/O 1 Others MODULE TYPE Serial RS485 Interface HOUSING 70x55x15 I/O TYPE None POWER SUPPLY 5 VDC MAIN CHARACTERISTICS Small RS485 Modbus interface for Dupline, mainly used for HMIs

More details


Converters

Fieldbuses

Field Installation Bus and Safety Bus, Car Park “Guidance” System, Elevator Controls and Irrigation Systems

* Brand new product in its original packaging covered by the warranties and certifications provided by CARLO GAVAZZI

Quantity Price
1+$361.42
2+$351.35
3+$347.39
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Dupline®
Modbus interface module
Duline®
TypeGTI50
FieldbusInstallationbus
• Modbus-RTU slave.
• Originally designed for Dupline®Displays.
• RS 485 port for interfacing to control system.
• 128 Digital I/O’s incl. 128 AnaLink outputs.
• 25p Sub-D converter housing.
• Supplied by RS485 com-port
Product DescriptionOrdering Key
GTI50
GTI50 is originally designed as an interface solution for Dupline® GTD50 display, but can be used by all other Modbus-RTU masters.
The GTI50 supports Modbus- RTU function code "3" (read registers) and functioncode
"16" (write registers), and can read/write all 128 Dupline® I/O’s (incl. AnaLink). The max- imum numbers of registers that are allowed in 1 query are limited to 8 read registers or 8 write registers at a time.
Type: Dupline® Text Interface Type
TypeSelection
SupplyOrdering no.
By RS-485 Com-portGTI50
Input/Output Specifications
Modbus-RTU RS485
25-pole male SUB-D
Pin assignment Pin 7:GND
Pin 16:+ 5 VDC
Pin 10:TxRx-
Pin 22:TxRx+
Baudrate9600/19200
ParityNone
Databits/Stopbit8/1
Current load typ. 45ma
Dielectric voltage
RS485-Dupline® > 2 kVAC (rms)
Dupline®
Pin assignment Pin 1:Dupline®
Pin 2:GND
Adjustments
DIP-switch 1 Device address
DIP-switch 2 Baudrate
DIP-switch 3 Dupline® transmission
DIP-switch 4 Not used
General Specifications
Power ON delay< 2.0 s until start of
Dupline®carrier
< 40 s until correct reading of AnaLink values
Indication for
Communication2/132 ms flash
Dupline fault 1/4 sec flash
Environment
Pollution degree 2 (IEC 60664) Operating temperature -20 to 60°C Storage temperature-50 to +85°C
Humidity (non condensing)20 to 80% Mechanical resistance
Shock 15 G (11 ms) Vibration 2 G (6 to 55 Hz)
Dimensions 55 x 70 x 15 mm
Weight50 g
Specifications are subject to change without notice (07.06.2007) 1
Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.