Selected parameters MODULE TYPE Display HOUSING Panel-mount POWER SUPPLY AC I/O TYPE None NUMBER OF I/O 0 Others MODULE TYPE LED indicator module HOUSING 96x96x78 I/O TYPE None POWER SUPPLY 24 VAC MAIN CHARACTERISTICS AC-powered LED-indicator module with 16xLEDs
Display forDigital Signals TypeG5460 6606 Duline® FieldbusInstallationbus • 16 channel status LED indicator • Label slide for LED descriptions • Individual address coding of LED’s • Normal or inverted LED operation per 8 channel group • AC/DC power supply • NPN transistor output for loss of Dupline carrier • Horizontal panel mounting, 96 x 96 mm • Channel coding by GAP 1605 Product DescriptionOrdering Key G 5460 6606 230 Dupline display for panel mounting.Statusindication of 16 channels in 16 segment single point LED representa- tion. Display function normal or invertedforfastlocatingof deviations from normal oper- ation, e.g. missing start-up conditions,open doorsand windows, machine fault announciation etc. Replaces all old channel dis- play types (FK3C and FK4C). Type: Dupline® Type no. Supply TypeSelection SupplyOrdering no. 16 channels, 16-dot LED 24 VACG5460 6606 024 115 VACG5460 6606 115 230 VACG5460 6606 230 12 VDC* *All AC-types may be supplied with 12 VDC through pins 2 & 3. AC supply through pins 21 & 22. Display/Output Specifications (cont.) DC in, output & Dupline connections4 pole, 5 mm, plugable Response time< 2 pulse trains Display/Output Specifications Supply Specifications Display Display formatChannel status Display typeLED Size of LEDs Ø5 Display colour Red Display test None, but display test can be performed by setting internal switches to normal, programming fail polarity to "I" with GAP 1605, and then unplug the Dupline connection. Fault output (pin 4) Voltage range VBB4 to 35 VDC (or VDDin) Reverse-polarity protectionYes Current≤ 100 mA Short-circuit protection None Built-in protective diodes None Off-state leakage current ≤ 100 µA Voltage drop ≤ 1.5 V Cable length ≤ 3 m Dielectric voltage Output – Dupline None Power supplyOvervoltage cat. III (IEC 60664) Connection 2 pole, 10 mm, plugable Operational voltage, through pins 21/22 230 230 VAC ±15% (IEC 60038) 115 115 VAC ±15% (IEC 60038) 024 24 VAC ±15% (IEC 60038) Frequency45 to 65 Hz Voltage interruption≤ 40 ms Rated operational powerTyp. 4 VA Rated impulse withstand voltage 230 V4 kV 115 V2,5 kV 024 V800 V Dielectric voltage Supply – Dupline≥ 4 kVAC (rms) Supply – Output ≥ 4 kVAC (rms) Alternative DC supplyOvervoltage cat. III (IEC 60664) Operational voltage (VDDin), through pins 2/3 12 VDC ±10% (ripple incl.) Reverse polarity protectionYes Rated operational current40 mA Inrush current ≤ 1 A Specifications are subject to change without notice (01.02.2007) 1 Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.