Selected parameters MODULE TYPE Converter/Repeater HOUSING DIN-rail POWER SUPPLY AC I/O TYPE None NUMBER OF I/O 0 Others MODULE TYPE Dupline Repeater HOUSING H8 (W144) I/O TYPE None POWER SUPPLY 24 VAC MAIN CHARACTERISTICS Dupline Repeater for regenerating the carrier output signal
Repeater Type D 3892 0000 • Repeaters make any transmission-distance possible (cascading of repeaters possible) • Power-booster for applications with several Dupline®-supplied units • Minimized delay (max. 1 Dupline® scan) • Number of channels adjusted automatically • H8-housing • LED-indication for power supply, primary Dupline® OK and secondary Dupline® (follows Dupline® carrrier) • Built-in channel generator function for secondary Dupline® • AC power supply Product Description Ordering Key D 3892 0000 230 The Dupline® Repeater is used to increase the distance in a Dupline®network. Further more, itcanbeusedasa “Powerbooster” in sections with several Dupline®supplied units. Type: Dupline® H8-housing Channel Generator (secondary Dupl.) Power supply Type Selection Supply Ordering no. 24 VACD 3892 0000 024 115 VACD 3892 0000 115 230 VACD 3892 0000 230 InputSpecifications Input Primary Dupline® Dielectric voltage Primary Dupline to Secondary Dupline® ≥ 2 kVAC (rms) Supply Specifications Power supplyOvervoltage cat. III (IEC 60664) Rated operational voltage through term. 21 & 22 230 230 VAC, ±15% (IEC 60038) 115 115 VAC, ±15% (IEC 60038) 24 24 VAC, ±15% Frequency45 to 65 Hz Voltage interruption ≤ 40 ms Rated operational power6 VA Power dissipation ≤ 7 W Rated impulse withstand voltage230 4 kV 115 2.5 kV 24 800 V Dielectric voltage Supply Primary Dupline® ≥ 4 kVAC (rms) Supply Secondary Dupline®≥ 4 kVAC (rms) Output Specifications OutputSecondary Dupline® Number of outputs1 Output voltage8.2 VDC Current≤ 45 mA Shortcircuit protection ≤ 60 s Output impedance≤ 15 Ω Sequence timeFollows primary Dupline® Distance to transmitters100% Dupline®transmission delay from primary to secondary 1 mSec secondary to primary max 1 Dupline® scan 136 mSec General Specifications Power ON delay ≤ 5 s Indication for Supply ONLED, green Primary Dupline® OK LED, yellow Secondary Dupline® carrier LED, yellow Environment Degree of protectionIP 40 Pollution degree3 (IEC 60664) Operating temperature0° to +50°C (+32° to +122°F) Storage temperature 50° to +85°C (58° to +185°F) Humidity (noncondensing) 20 to 80% RH Mechanical resistance Shock15 G (11 ms) Vibration2 G (6 to 55 Hz) DimensionsH8housing MaterialPC/ABS CYCOLOY C 2100 Weight485 g MTBF65,000 hours Specifications are subject to change without notice (11.06.2013) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.