Selected parameters MODULE TYPE Carpark monitor HOUSING DIN-rail DISPLAY PROPERTIES N/A Others MODULE TYPE Carpark monitor HOUSING H4(W72) POWER SUPPLY Bus-powered DISPLAY PROPERTIES Module for monitoring number of free places in a segment, controls external display
Dupline® Carpark Monitor Type GP34829091724-x • Monitor module for the L1 bus and the L2 bus • GP34829091724 is able to handle 120 sensors for each monitor modul on the L1 bus • GP34829091724-1 is able to handle 60 sensors for each monitor modul on the L1 bus • Possible to install 480 monitors in a system • One or several displays can be connected to the built-in RS485 • Output function on the L2 bus for e.g. gate control • Booking function for 3-colour sensors in cooper- ation with the Dupline CarPark Software. Only GP34829091724-1 • H4-Housing • Programmed with the Carpark configurator GP73800080 • Termination switch for RS485 on the front • cULus approved Product Description Ordering Key GP34829091724 The Carpark monitor GP 3482 9091 is a part of the Dupline® Carpark concept. It is the intel- ligent part of the system. The monitor GP 3482 9091 have twoindependent bussesL1 and L2. The L1bus is connect- ed to the sensors and the L2 is connected to other monitor It is possible to connect one or several displays on the RS485 bus. The Carpark monitor is programmed with the Carpark configurator GP 7380 0080. The GP34829091724-1 is designed toworkonlywith 3-colour sensorsand the Dupline® Carpark Software. Type: Dupline® Carpark H4-Housing Type Selection Ordering no. modules. Carpark Monitor GP34829091724 Carpark Monitor with booking functionGP34829091724-1 Output Specifications Output RS 485Gnd on pin 22 A on pin 27 B on pin 28 Communication Standard RS 485 Baudrate 4800 Dielectric voltage RS485 - Dupline®L1+L2 500 VAC (rms) ProtokolCarpark Supply Specifications Primary bus L120-30 VDC pulsating (3-wire Dupline® bus) L1 busDupline®+ pin 21 Dupline®- pin 22 Power pin 23 Current consumption≤ 27 mA ± 10% Current consumption Dupline®< 0.03 mA (High impedance) Primary bus L220-30 VDC pulsating (3-wire Dupline® bus) L2 busDupline®+ pin 24 Dupline®- pin 25 Power pin 26 Current consumption≤ 8 mA ± 10% Current consumption Dupline®< 0.03 mA (High impedance) Power dissipation ≤ 1 W Dielectric Voltage Dupline® L1 - Dupline® L2500 VAC (rms) General Specifications ProgrammingBy GP73800080 Environment Degree of protection IP20 B Operating temperature-40° to +50°C (-40° to +122°F) Storage temperature -50° to +85°C (-58° to +185°F) Humidity (non-condensing)20 to 95% Mechanical resistance Shock15 G (11 ms) Vibration 2 G (6 to 55 Hz) DimensionsH4-housing LED Green LEDPower ON First yellow LEDDupline®bus L1 Second yellow LEDDupline®bus L2 EMC performance EN61000-6-3 (emission) EN61000-6-1 (immunity) Power-on delay 3 sec. Termination switch for RS485The switch on the front of the monitor, turns the built- in resistor on 120Ω ON or OFF. ApprovalcULus (UL60950) MTBF100,000 hours Specifications are subject to change without notice (21.11.2014) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.