GP62652302724 CARLO GAVAZZI Selected parameters MODULE TYPE Bus-controlled 3-colour LED Indicator HOUSING Ce..

Dupline® Car Park System
Type GP6265 230x724
Bus-controlled LED Indicator forSensor
• 3-colour LED indicator
• LED colour control via the bus
• Can be used for e.g. indication of booked spaces
• Can also be used as 2-colour bus-controlled indicator
• GP62652301724 is a red/green/amber LED indicator
• GP62652301724-1 is a red/green/amber LED indicator
• GP62652302724 is a red/green/blue LED indicator
• GP62652303724 is a red/blue/amber LED indicator
• Powered from the Dupline® 3-wire bus
• cULus approved
Product Description
Ordering keyGP 6265 230x724
GP6265 230x is a 3-colour bus-controlledLED indicator and is part of the Dupline® parking guidance system. The unit is to be mounted outside the parking space and it is used to indicate the status (e.g. available, occupied, booked). It can either be con-
trolled from a PC/PLC (3-col- our mode) or directly from the sensor (2-colour mode). In the latter case the advantage is a simplified wiring compared to a std. indicator which needs to be connected to the sensor directly.
Type: Dupline®
Housing Input type Channels Inputs Supply
Type Selection
GP6265 2301 724red/green/amber LED indicator GP6265 2301 724-1 red/green/amber LED indicator GP6265 2302 724red/green/blue LED indicator GP6265 2303 724red/blue/amber LED indicator
Supply Specifications
Power supply: 21 VDC min. 30 VDC max. (Overvoltage category III
(IEC60664))
Max. supply current5 mA
Power consumption:< 0.7 Watt
Environment
• Protection: IP 34
• Operating temperature: -40°C to 70°C
• Storage temperature: -40°C to 85°C
• Pollution Degree: 3 (IEC 60664)
• Dimensions: Ø118 x 76 mm
• Material: The case is made of polypropylene. The sensor lid is made of clear polycarbonate.
Input/Output Specifications
RJ12 connectorforaddressprogramming with Carpark Configurator GP7380 0080
2x3-pin connector • Printed dot on the indicator is Dupline®+
• D- or Gnd
• POW (power from DMM orCoupler).See draw- ingonpage3(System diagram)
1x2-pin connector Not in use for GP6265230x
NOTE: The indicatorconnectorsare using the “push-wire connection”method. Use 1.5 mm2 single core wire for the sensor installation.
Specifications are subject to change without notice (05.08.2014) 1