G34485238230 CARLO GAVAZZI Selected parameters MAIN CHARACTERISTICS Output module HOUSING DIN-rail POWER SUP..

Dimmer, 2 outputs, 1 to 10 V Type G 3448 5238
Duline®
FieldbusInstallationbus
• Switching and dimming of adjustable ballasts 1 to 10 V
• 8 control-channel receiver
• For DIN-rail mounting
• LED-indications for Dupline® carrier and outputs
• Bulb-conserving soft-start function
• Channel coding by GAP 1605
• 4 lighting scenes
• Transmits the status of the dimming outputs
Product Description
Ordering Key
G 3448 5238 230
The G3448 5238 2-output lighting scene dimmer is a component of the Dupline Installation System. Itallows different types of electronic ballasts to be operated and dimmed and enables up to 4 lighting arrangements (per output)tobestored,which can then be retrieved at any time. In addition, it transmits the status of the dimming out- put for every individual output. The dimmer setting which was selected last is stored as a"memorysetting"inthe
internal memory and is rese- lected next time the lighting is switched on via channel 1/5. A power failure will erase the memorysetting.The bright- ness of the lighting scenes is preset at the factory in steps these settings cannot be altered. By the aid of push- button combinations or by means of the test unit, the lighting scenes can be unlocked,modifiedand also retrieved. The lighting is switchedonvia a bulb-pre- serving softstart facility.
Type: Dupline® "H4"- Housing Dimmer
8 Channels
2 outputs
1 to 10 V Analog
Power supply
Type Selection
Supply Ordering no.
230 VAC G 3448 5238 230
Supply Specifications
Power Supply
Rated operational voltage 230 VAC ±10% Power consumption2 VA
Power dissipationMax. 4.5 W Frequency 50/60 Hz
Output Specifications
Ballast outputs2
Dimming capacity 2 x 1 to 10 V
Max. load capacity50 mA on each output
Dimming speed 3.6 s (10% - 100%)
Relay outputs2
Max. switching voltage 250 VAC Load capacity 10 A
Response time1 cycle:
≤ 272 ms @ 128 channels)
General Specifications
Power ON delay1 s
Indication for
Power OnLED, Green
Dupline® carrier LED, Yellow
Output On LED, Red (one per output)
Environment
Operating temperature0° to +50°C/32° to +122°F
Humidity (non-condensing)Max. 85%
Housing H4-housing
StandardsIEC 60669, EN 55022/
EN 50081-1 and EN 55024/ EN 50082-1
Specifications are subject to change without notice (19.04.2007)1
Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group