G38001016230 CARLO GAVAZZI Selected parameters MAIN CHARACTERISTICS Controller HOUSING DIN-rail POWER SUPPLY..

Master Channel Generator
Types G 3800 0016, G 3800 1016
Duline®
FieldbusInstallationbus
• Programmable channel generator
• Automatic data exchange between multiple networked Master
Generators, allowing systems with up to 4096 I/O points
• Option for built-in GSM Modem for monitoring and control via SMS
• User-friendly configuration via Windows 98/2000/NT/XP
software
• Real-time, timer and logic functions
• Analog set-point control and monitoring
• Light and Rollerblind control functions
• Alarm Monitoring
• Option for Radio controlled clock for high real time accuracy
• 2 x RS232 ports for configuration and Dupline data read/write
• 1 x RS485 port for networking of up to 32 Master Generators
• Modbus-RTU protocol
• Built-in software driver for external radio modem
• 4 digital inputs / 4 digital outputs on-board
• H8-housing for DIN-rail mounting (EN50022)
• AC or DC power supply
Product DescriptionOrdering Key
G 3800 1016 230
Programmable channel gene- rator with built-in dedicated intelligent functions for light and roller blind control, alarm monitoring and analog set- pointcontrol.In additionto that, there is realtime-, timer- and logic- functions. Pro- gramming is easily performed through Windows-based con- figurationsoftware.An optional built-in GSM modem can be used for monitoring and control of Dupline signals via SMS. Up to 32 Master generators can be networked
as slaves in a RS485 network using the Modbus protocol. The unit has 4 digital inputs and 4 digital outputs on- board,and itis possibleto create links to other Dupline networksvia external Radio Modem.The G3800X016 is different from the G3800X015 in that it has the capability to perform automatic data exchange with up to 32 other G3800X016’s in a RS485 net- work,enablingupto4096
I/O-points in one system.
Type: Dupline® H8-housing GSM phone
Master channel generator
Supply
Type Selection
SupplyOrdering no.Ordering no.
w. GSM telephone
115/230 VACG 3800 0016 230G 3800 1016 230
10-30 VDCG 3800 0016 800G 3800 1016 800
Input/Output Specifications
Serial PortRS 232
COM 1115 kBaud
COM 29600 Baud, adjustable
Data format 8 bit
COM 1, COM 2 No parity, 1 stop bit
9-pole female SUB-D Pin assignmentTxDPin 2
RxDPin 3
GNDPin 5
Dielectric voltage
Com.port - Dupline®≥ 2 kVAC (rms) Protocol Modbus-RTU
RS 485 TerminationPin 27When in use, connect to pin 31
Fs-BPin 28When in use, connect to pin 30
Fs-APin 29When in use, connect to pin 31
+ (B) Pin 30
- (A) Pin 31
Sequence time
32 channels / 128 channels 38.6 ms / 132.3 ms
Digital outputs 4 PNP transistors FunctionProgrammable Output voltage VDD ≤ 35 VDC
Output current≤ 100 mA Output voltage drop ≤ 2 V
Off-state leakage current≤ 100 µA Short-circuit protection None Built-in protective diodes None Dielectric voltage
Output - Dupline® ≥ 4 kVAC (rms) Output - Input 200 V
Inductive loads External noise suppression required
Inputs
Digital 6 - 30 VDC
Voltage ON > 5.5 V OFF < 1.5 V Current≤ 6 mA
Dielectric voltage
®
GNDPin 32
V+Pin 33*)
Input - Dupline
GSM Modem
≥ 4 kVAC
ProtocolModbus-RTU
Dupline® OutputDupline® carrier
Output voltage8.2 V Current< 130 mA Short-circuit protection Yes
Siemens cellular engine TC35
Dual Band EGSM900 and GSM1800
Output power Class 4 (2 W) EGSM900
Class 1 (1 W) GSM1800
Antenna connector FME
*)V+ and GND may be used as supply for digital I/O’s, if RS 485 is not used.
Specifications are subject to change without notice (01.09.2008) 1
Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group