Selected parameters FUNCTION Power Analyzers MOUNTING Panel POWER SUPPLY 90 to 260V AC/DC OUTPUT DIGITAL INPUT None INPUT TYPE 3-phase AC CONNECTION CT/VT COMMUNICATION RS485 Others RANGE 78V to 250VLL 1/5(6)AAC DISPLAY 3x3 DGT VARIABLES kWh, kvarh, W, Wdmd, var, VA, VAdmd, PF, V, A, An, Admd, Hz, Amax, Admd max, Wdmd max DIGITAL INPUTS none PULSE none ALARMS Virtual ANALOGUE none
Energy Management Power Analyzer Type WM14-96 “Basic Version” • Class 1 (active energy) • Class 2 (reactive energy) • Accuracy ±0.5 F.S. (current/voltage) • Power analyzer • Display of instantaneous variables: 3x3 digit • Display of energies: 8+1 digit • System variables and phase measurements: W, Wdmd, var, VA, VAdmd, PF, V, A, An, Admd, Hz • Amax, Admd max, Wdmdmaxindication • Energy measurements: kWh and kvarh • Hour counter (5+2 DGT) • TRMS meas. of distorted sine waves (voltages/currents) • Power supply: 24V, 48V, 115V, 230V, 50-60Hz 18 to 60VDC • Optional dual pulse output • Alarms (visual only) VLN, An • Optional galvanically insulated measuring inputs Product Description • Protection degree (front): IP65 • Front dimensions: 96x96mm • Optional RS422/485 serial port How to order WM14-96 AV5 3 D PGX 3-phase power analyzer with built-in programming key- pad. Particularly recom- mended for displaying the main electrical variables. Housing for panel mounting, (front) protection degree IP65, and optional RS485 serial port or dual pulse out- put. Parameters pro- grammable by means of CptBSoft. Model Range code System Power supply Option How to order CptBSoft Type Selection CptBSoft (compatible only with S or SG options): software to program the working parameters of the power analyzer and to read the energy and the instantaneous variables. Range codes AV5: 380/660VL-L/5(6)AAC VL-N: 185 V to 460 V VL-L: 320 V to 800 V AV6: 120/208VL-L/5(6)AAC VL-N: 45 V to 145 V VL-L: 78 V to 250 V Phase current: 0.03A to 6A Neutral current: 0.09 to 6A Inputspecifications Rated inputs System 3 :1-2-3-phase, balanced/unbalanced load,with or without neutral Power supply A: 24VAC -15+10%, 50-60Hz B: 48VAC -15+10%, 50-60Hz C: 115VAC -15+10%, 50-60Hz D: 230VAC -15+10%, 50-60Hz 3:18 to 60VDC (not available in case of SG or PG options) Options X: None S: RS485 port SG:RS485+galvanic insu- lated measurig inputs PG:Dual pulse output+ galvanically insulated measuring inputs. 0.03Ato0.25A:±(2%FS +5DGT) Current “X-S options” 3 (non insulated each other) Current “SG-PG options”3 (insulated each other) Voltage4 Accuracy (display, RS485) with CT=1 and VT=1 AV5: (@25°C ±5°C, R.H. ≤60%)1150W-VA-var, FS:230VLN, 400VLL AV6: 285W-VA-var, FS:57VLN, 100VLL Current 0.25 to 6A: ±(0.5% FS +1DGT) 0.03Ato0.25A:±(0.5%FS+7DGT) Neutral current0.25 to 6A: ±(1.5% FS +1DGT) 0.09Ato0.25A:±(0.5%FS+7DGT) Phase-phase voltage ±(1.5% FS +1 DGT) Phase-neutral voltage ±(0.5% FS + 1 DGT) Active and Apparent power,0.25 to 6A: ±(1% FS +1DGT) 0.03A to 0.25A: ±(1% FS +5DGT) Reactive power 0.25 to 6A: ±(2% FS +1DGT) Active energy “X-S option” Class 2 (start up “I”: 30mA) Reactive energy “X-S option”Class 3 (start up “I”: 30mA) Active energy “SG-PG opt.” Class 1 (start up “I”: 30mA) Reactive energy “SG-PG opt.” Class 2 (start up “I”: 30mA) Frequency±0.1Hz (48 to 62Hz) Additional errors Humidity≤0.3% FS, 60% to 90% RH Temperature drift≤ 200ppm/°C Sampling rate1400 samples/s @ 50Hz 1700 samples/s @ 60Hz Display refresh time700ms Display TypeLED, 14mm Read-out for instant. var.3x3 DGT Read-out for energies 3+3+3 DGT (Max indication: 999 999 99.9) Specifications are subject to change without noticeWM14 96 DS ENG2005081
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.