Selected parameters FUNCTION Power Analyzers MOUNTING Panel POWER SUPPLY 18 to 60V AC/DC OUTPUT DIGITAL INPUT DC output (Open Collector) INPUT TYPE 3-phase AC CONNECTION CT/VT COMMUNICATION RS485 Others RANGE 320V to 800VLL 1/5(6)AAC DISPLAY 3x3 DGT VARIABLES VLL,VLN,VLN min max,VA,VAdmd dmdmax,W,Wmax dmd,Wdmdmax,var,Hz,ASY,A,An,Amin max dmdmax,PF,PFmin,FFT DIGITAL INPUTS none PULSE 2 ALARMS 2 ANALOGUE none
Energy Management Power Analyzer Type WM14 96 “Advanced version” • Protection degree (front): IP65 • 2 digital outputs • 16 freely configurable alarms with OR/AND logic linkable with up to 2 digital outputs • RS422/485 serial output (MODBUS-RTU), iFIX SCADA compatibility Product Description • Class 1 (kWh), Class 2 (kvarh) • Accuracy ±0.5 F.S. (current/voltage) • Power Analyzer • Instantaneous variables read-out: 3 DGT • Energies readout: 8+1 DGT • System variables: VLL, VLN, An, Admd max, VA, VAdmd, VAdmd max, W, Wdmd, Wdmdmax, var, PF, Hz, ASY • Single phase variables: VLL, VLN, VLN min, VLN max, A, Amin, Amax, Admd, VA, W, Wdmd, Wmax, var, PF, PFmin • Harmonic analysis (FFT) up to the 15thharmonic (cur- rent and voltage) • Four quadrant power measurement • Energy measurements: total and partial kWh and kvarh • Hour counter (5+2 DGT) • TRMS meas. of distorted sine waves (voltages/currents) • Universal power supply: 90 to 260 VAC/DC, 18 to 60 VAC/DC • Front dimensions: 96x96mm • Voltage asymmetry, phase sequence, phase loss control How to orderWM14-96AV5 3 H R2 S1 AX 3-phase advanced power analyzer with integrated pro- gramming key-pad. Particu- larly recommended for the measurement of the main electrical variables. Housing for panel mounting, with RS485 communication port or pulse and/or alarm outputs. Model Range code System Power supply Output 1 Output 2 Option Type Selection Range codes AV5: 380/660VL-L/1/5(6)AAC VL-N: 185 V to 460 V VL-L: 320 V to 800 V AV6: 120/208VL-L/1/5(6)AAC VL-N: 45 V to 145 V VL-L: 78 V to 250 V System 3 :1, 2 or 3 phase, balanced/unbalanced load, with or without neutral Power supply Output 1 R2: 2-relay outputs O2: 2-open collector outputs Output 2 XX: None S1: RS485/RS422 port Options Phase current: 0.03A to 6A Neutral current: 0.09A to 6A L: 18 to 60 VAC/VDC H: 90 to 260 VAC/VDC AX: advanced functions Inputspecifications Rated inputsSystem type: 3 - phase Current3 (By shunts) Voltage4 Accuracy (display, RS485) with CT=1 and VT=1 AV5: (@25°C ±5°C, R.H. ≤60%)1150W-VA-var, FS:230VLN, 400VLL AV6: 285W-VA-var, FS:57VLN, 100VLL Current 0.25 to 6A: ±(0.5% FS +1DGT) 0.03Ato0.25A:±(0.5%FS+7DGT) Neutral current0.25 to 6A: ±(1.5% FS +1DGT) 0.09Ato0.25A:±(1.5%FS+7DGT) Phase-phase voltage ±(1.5% FS +1 DGT) Phase-neutral voltage ±(0.5% FS + 1 DGT) Active and Apparent power,0.25 to 6A: ±(1% FS +1DGT) 0.03A to 0.25A: ±(1% FS +5DGT) Reactive power 0.25 to 6A: ±(2% FS +1DGT) 0.03A to 0.25A: ±(2% FS +5DGT) Active energy Class 1 (start up current: 30mA) Reactive energyClass 2 (start up current: 30mA) Frequency±0.1Hz (48 to 62Hz) Harmonic distortion ±3% F.S. (up to 15th harmonic) (F.S.: 100%) Specifications are subject to change without noticeWM14 96 A DS ENG2305081
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.