The indicated delivery times are from the reopening of our warehouses that will be closed for holidays from 14/08/2017 to 25/08/2017.
Selected parameters FUNCTION Energy analyzer MOUNTING DIN Rail POWER SUPPLY Self power supply OUTPUT DIGITAL INPUT DC output (Open Collector) INPUT TYPE 3-phase AC CONNECTION Direct COMMUNICATION None Others RANGE 196V to 460VLL 10(65)A DISPLAY 7+1 DGT VARIABLES kWh, kvarh, VLL, VLN, Admd max, VA, VAdmd, VAdmd max, W, Wdmd, Wdmd max, var, PF, Hz, Phase-sequence DIGITAL INPUTS none PULSE 2 ALARMS none ANALOGUE none
Energy Management Energy Analyzer Type EM24 DIN • RS485 serial output (MODBUS-RTU), iFIX SCADA com- patibility • M-bus communication port (option M1) • Dupline communication capability (option DP) • Application adaptable display and programming proce- dure (Easyprog function) • Easy connections management • Certified according to MID Directive (option PF): see “how to order” below • Other versions available (not certified, option X): see “how to order” on the next page • Class 1 (kWh) according to EN62053-21 • Class B (kWh) according to EN50470-3 • Class 2 (kvarh) according to EN62053-23 • Accuracy ±0.5 RDG (current/voltage) • Energy analyzer • Instantaneous variables readout: 4 DGT • Energies/gas/water readout: 8 DGT • System variables: VLL, VLN, Admd max, VA, VAdmd, VAd- md max, W, Wdmd, Wdmd max, var, PF, Hz, Phase- sequence. • Single phase variables: VLL, VLN, A, VA, W, var, PF • Energy measurements: total and partial kWh and kvarh or based on 4 different tariffs single phase measurements • Gas, cold water, hot water, kWh remote heating mea- surements • Hour counter (6+2 DGT) • TRMS measurements of distorted sine waves (volt- ages/currents) • Self power supply (AV2-AV9 inputs) • Auxiliary power supply (AV5-AV6 inputs) • 3 digital inputs for tariff selection, DMD synch or gas/ water (hot-cold) and remote heating metering (on request) • 2 digital outputs for pulses or for alarms or as a mix of them • Dimensions: 4-DIN modules • Protection degree (front): IP50 Product Description Three-phase energy analyzer with built-in configuration joystickandLCD datadis- playing particularly indicat- ed for active and reactive energy metering and for cost allocation. Housing for DIN- rail mountingwithIP50 (front) protection degree. Direct connection up to 65A and by means of external current and potential trans- formers. Moreover the meter can be provided with digital outputs that can be either for pulse proportional to the active (imported and exported) and reactive energy beingmea- sured or foralarm outputs. In alternative the RS485 communication port and 3 digital inputs or Dupline port and 3 digitalinputsor the M-bus communication port are available as an option. Specifications are subject to change without notice EM24 DIN DS260315 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.