Selected parameters FUNCTION Energy analyzer MOUNTING DIN Rail POWER SUPPLY Self power supply OUTPUT DIGITAL INPUT Relay output INPUT TYPE 1-phase AC CONNECTION Direct COMMUNICATION None Others RANGE 230VLN AC 5(32)A DISPLAY 5+1 DGT VARIABLES kWh, kvarh, V, A, W, Wdmd, Wdmd max, var, PF, Hz DIGITAL INPUTS none PULSE none ALARMS 1 ANALOGUE none
Energy Management Energy Analyzer Type EM11DIN • Other versions available (not certified, option X): see “how to order” on the next page Product Description • Class 1 (kWh) according to EN62053-21 • Class B (kWh) according to EN50470-3 • Class 2 (kvarh) according to EN62053-23 • Accuracy ±0.5 RDG (current/voltage) • Energy analyzer • Instantaneous variables readout: 4 DGT • Energies readout: 6 DGT • Instantaneous variables: V, A, W, Wdmd, Wdmd max, var, PF, Hz • Single phase variables: VLL, VLN, A, VA, W, var, PF • Energy measurements: total kWh and kvarh • TRMS measurements of distorted sine waves (voltages/currents) • Self power supply • Dimensions: 1-DIN module • Protection degree (front): IP40 • 1 pulse output on request • 1 alarm output on request • Certified according to MID Directive (option PF only): see “how to order” below One-phase energy analyzer with built-in configuration push buttonand LCD data displaying particularly indicated for active and reactive energy metering and for cost allocation. Housing for DIN-rail mounting, IP40 (front) protection degree.Direct connection up to 32A. Moreover the meter can be provided with either pulse outputproportionaltothe active energy being measured or alarm control on the available instantaneous variables. MID Certified according to MID Directive, Annex "B" + Annex "D" for legal metrolo- gyrelevanttoactiveelectricalenergy How to orderEM11 DIN AV8 1 X O1 PF Model Range code meters (see Annex MI-003 of MID). Can be used for fis- cal (legal) metrology. System Power supply Output Option Type Selection Range code AV8: 230VLN AC - 5(32)A (direct connection) System 1:1-phase Output O1: Pulse type (open collector output) Power supply X: Self power supply (from 48 to 62Hz). The instrument works on the range from -20% to +20% of the measuring input nominal voltage. Option PF: Certified according to MID Directive, Annex "B" + Annex "D" for legal metrol- ogy relevant to active electrical energy meters (see Annex MI-003 of MID). Can be used for fiscal (legal) metrology. AV81 X O1PF NOTE: please check the availability of the needed code on the verification path diagram on left before order. Specifications are subject to change without notice EM11DIN DS ENG 3010121
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.