NA12DLIFT CARLO GAVAZZI Screw-fixed POWER SUPPLY 24 VAC/DC MOUNTING DIN-rail

Lift Door Unlocking and
Cabin Levelling Safety Module
NA12DLIFT
• Certified according to the Lift Directive
and EN 81-1, /-2, EN 12015, EN 12016 and the requirements of the amended A3 directive
• Redundant circuit
• Force guided relay contacts
• Dual channel input
• 2 NO safety outputs
• Failure diagnosis by LEDs
• Feedback circuit for external contactors monitoring
• Possibility to connect mechanical or magnetic switches for lift cabin position monitoring
• Automatic or manual start
• Approval: TÜV
Product Description
Ordering Key
NA12 D LIFT
Lift door unlocking and lift cabinlevelling safety module, designed according to Lift Directive 95/16/CE and to safety circuits requirements of EN 81-1, /-2, EN 12015 and EN
12016 Standards.
The moduleisprovidedwith safety outputs with force guided relay contacts, and feedback circuit. Suited for applications of risk category 4.
Housing Application Controlled Devices Safety Outputs Safety Category Specific Version
Approvals
Electrical Specifications
Power supply 24 VAC -15/+10% 50-60Hz /
24 VDC -15/+10%
Power consumption< 5 VA / 5 W Input current/voltage 70 mA @ 24 VDC Safety outputs 2 NO
Auxiliary outputs--
Safety output switchingAC 230/240 VAC/8A/1380VA voltage /current /capability DC 300 V/6A/1380 VA Safety output
contact fuse protection 5 A fast or 4 A delayed
Insulation voltage2.5 KV for signal parts
4.0 KV for safety output parts: Pollution degree 2
Overvoltage category III
TimeSpecificationsEnvironmental Specifications
Delay on energisation ≤ 150 ms Delay on de-energisation≤ 25 ms Recovery time≥ 25 ms Channel simultaneity ∞
Operating temperature-20°C ... + 65°C
Storage temperature -25°C ... + 65°C
Mechanical Specifications
Protection degree terminals IP 20
Protection degree housing IP 40
Max cross section
of external conductors2,5 mm2 flexible wire
2
Housing materialPolyamid PA 66
2.5 mm
rigid wire
Housing type22.5 mm housing models
MountingDIN rail
Dimensions22.5 x 99 x 114 mm
Weight 200 g
Specifications are subjected to change without notice (09.04.13) 1