Solid State Relays DC Switching Types RGC1DSolid State Contactor RGS1DSolid State Relay RGS1D RGC1D •IGBT power semiconductor •17.5mm product width, with or without integrated heatsink •Rated Operational voltage: 1000 VDC •Rated Operational current: Up to 25 ADC •Control voltage: 4.5-32 VDC •UL508, CSA22.2 No. 14-10 •Input polarity protection •Removable IP20 cover •Integrated free-wheeling diode for output protection •Max. transient peak voltage: 1200V •RoHS compliant Product DescriptionOrdering Key RGC 1 D 1000 D 15 K K E _ This product series is mainly intended to switch a string of photovoltaic panels with a maximumstringvoltageof 1000VDC and up to 25ADC in only 17.5mm width. It may be used in other DC application as well. The control port is protected against reversepolarity while Ordering Key the IGBT at the output is pro- tected against back voltage with an integrated free- wheeling diode. RGS1D is the panel mount version while the RGC1D has an integrated heatsink. Specificationsarestatedat 25°C unless otherwise noted. Solid State Relay Number of poles Switching mode Rated operational voltage Control voltage Rated operational current Connection type for control Connection type for power Connection configuration Options 1Phase Rated VoltageControl VoltageRatedConnectionConnection Connection DC switchingCurrent Control PowerConfiguration RGC1D: Contactor1000:D: 4.5 - 32 VDC15: 15 ADC K: Screw K: ScrewE: Contactor RGS1D:SSR 1000 VDC 25: 25 ADC Selection Guide (Integratedheatsink) Rated OutputMax. transientControl VoltageRated Operational Current @40°C voltagepeak voltage15 ADC 1000 VDC 1200Vp 4.5 - 32 VDC RGC1D1000D15KKE Selection Guide (Panel-mount Solid State Relay) Rated OutputMax. transientControl VoltageRated Operational Current voltagepeak voltage15 ADC25 ADC 1000 VDC1200Vp4.5 - 32 VDCRGS1D1000D15KKE RGS1D1000D25KKE RGS1D1000D25KKEHT 1 1: Option with attached thermal pad. Output Voltage Specifications General Specifications Operational Voltage Range IEC 2 24 - 1000 VDC UL508 224 - 600 VDC Maximum transient peak voltage1200 VDC Maximum Onstate Voltage Drop 1.6 VDC 2.-15% on lower voltage limit ProtectionIP20 Control input statuscontinuously ON Green LED, when control input is applied Pollution degree 2 (non-conductive pollution with possibilities of condensation) Over-voltage category III (fixed installations) Isolation Input to Output 4kVrms Input&Output to Case4kVrms Specifications are subject to change without notice (08.10.2013) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.