Mounting box

BUCKET P/MECAN 4 MODUL45 UT3 45 3

UT4 universal support, with cover plate for Modul 45® devices, system length 208 mm. Universal support with two strain reliefs, mounting bridges, partition and UT4 P4 cover plate for installation of 4 Modul 45 devices in device installation units of nominal sizes R7, R9 and 9.Universal support with two strain reliefs, partition and UT 4 P4 cover plate for installation of 4 Modul 45 devices in OKB IT device supports.

Installation frame for 2f + 2f Modul 45, Graphite black, 9011, Polyamide, PA

MT45V 2+2 Frame, for 2f + 2f Modul 45 Polycarbonate/Acrylonitrile-butadiene-styrole, PC/ABS,

Installation frame for combination of 2x and 2x Modul 45® devices. For the installation of a combination of double and double Modul 45 sockets for System 55 service outlets with mounting support for vertical installation of Modul 45 devices. The installation frame is designed for use with 0° sockets for straight connectors (not angled connectors).

SOP H 3X4M FLOOR BOX 12M

SOP H 3X4M BOX GROUND 12M

Support kits for standard floor boxes - for sockets in horizontal position - adjustable height - 12 modules

SOP H 3X8M FLOOR BOX 24M

SOP H 3X8M BOX FLOOR 24M

Support kits for standard floor boxes - for sockets in horizontal position - adjustable height - 24 modules

SOP V 2X6M FLOOR BOX 12M

SOP V 2X6M BOX GROUND 12M

Support kits for standard floor boxes - for sockets in vertical position - 12 modules

SOP H 3X4M SM FLOOR BOX 12M

SOP H 3X4M CAJ FLOOR SM 12M

Support kits for flush floor boxes - for sockets in horizontal position - adjustable height - 12 modules

SOP H 3X8M SM FLOOR BOX 24M

SOP H 3X8M CAJ FLOOR SM 24M

Support kits for flush floor boxes - for sockets in horizontal position - adjustable height - 24 modules

SOP V 2X6M SM FLOOR BOX 12M

SOP V 2X6M CAJ FLOOR SM 12M

Support kits for flush floor boxes - for sockets in vertical position - 12 modules

FLOOR BOX IP44 SUPPORT 8M

BOX FLOOR IP44 SUPPORT 8M

Flat support plates for Arteor mechanism for 8 modules

KIT BOX FLOOR COVER PLAS H 18M

Standard floor boxes in kit for sockets in horizontal position - adjustable height - 18 modules

FLOOR BOX KIT LID PLAS V 12M

Standard floor boxes in kit for sockets in vertical position - 12 modules

Mounting plate for GE2 15 with 3x hole pattern Type A, 118x47x34, Stainless steel, grade 304, VA, 1.4301

Mounting support, 2 x type A. Mounting support to accept two data connection modules of the following types: AMP TYCO: Standard 110Connect, SL Series 110Connect and Toolless, AMP-Twist; Brand-Rex: unshielded; GG45; TKM RJ MOD; Nexans: LANmark with Adapter-Clip; Siemon CAT6; 3M K6 and K10.Dimensions of a mounting opening in mm: 20.10 x 14.80.

Mounting plate for GE2 17 with 2x hole pattern Type C, 118x47x34, Stainless steel, grade 304, VA, 1.4301

Mounting support, 2 x type C. Mounting support to accept two data connection modules of the following types: Brand-Rex: shielded; EKU: E-Stone; Dätwyler: KS-T, MS-K and KU-T module; R&M: Snap-In and Keystone; Rutenbeck: UM and UMflex; SETEC: MKJ, UKJ and XKJ; Siemon TERA; Telegärtner: AMJ and UMJ.Dimensions of a mounting opening in mm: 19.30 x 14.80.Suitable for GE2 / UDHome2 installation unit with floor covering recess.

Mounting plate for GE2F with 3x hole pattern Type A, Stainless steel, grade 304, VA, 1.4301

Mounting support, 2 x type A. Mounting support to accept two data connection modules of the following types: AMP TYCO: Standard 110Connect, SL Series 110Connect and Toolless, AMP-Twist; Brand-Rex: unshielded; GG45; TKM RJ MOD; Nexans: LANmark with Adapter-Clip; Siemon CAT6; 3M K6 and K10.Dimensions of a mounting opening in mm: 20.10 x 14.80.

Mounting plate for GE2F with 2x hole pattern Type C, Stainless steel, grade 304, VA, 1.4301

Mounting support, 2 x type C. Mounting support to accept two data connection modules of the following types: Brand-Rex: shielded; EKU: E-Stone; Dätwyler: KS-T, MS-K and KU-T module; R&M: Snap-In and Keystone; Rutenbeck: UM and UMflex; SETEC: MKJ, UKJ and XKJ; Siemon TERA; Telegärtner: AMJ and UMJ.Dimensions of a mounting opening in mm: 19.30 x 14.80.

Mounting plate with 2x hole pattern Type C, 116x36x34, Stainless steel, grade 304, VA, 1.4301

MTGE2 2C mounting bracket for 2x Type C connectors 116x36x34 Stainless steel 1.4301, A2, 1.4301

Mounting support, 2 x type C. Mounting support to accept two data connection modules of the following types: Brand-Rex: shielded; EKU: E-Stone; Dätwyler: KS-T, MS-K and KU-T module; R&M: Snap-In and Keystone; Rutenbeck: UM and UMflex; SETEC: MKJ, UKJ and XKJ; Siemon TERA; Telegärtner: AMJ and UMJ.Dimensions of a mounting opening in mm: 19.30 x 14.80.

Installation frame for 3f + 1f Modul 45, Graphite black, 9011, Polyamide, PA

MT45V 3+1 frame, for 3f + 1f Modul 45 Polycarbonate/Acrylonitrile-butadiene-styrole, PC/ABS,

Mounting frame for combination of Modul 45® triple and single mechanisms. To install a combination of a triple Modul 45 socket and a single socket in a System 55 mechanism box with mounting bracket for vertical installation of Modul45 mechanisms. The mounting frame is intended for use with 0° sockets for straight sockets (not angle connectors).

Module support for system height 55 mm, Graphite black, 9011, Polyamide, PA

Module support for vertical installation Modul 45® devices. Module support for the installation of up to eight Modul 45 devices in an empty standard device insert or in an empty height-adjustable cassette of the nominal sizes 9 or R9. The module support is snapped into the locking ladders.MT45V installation frames for the installation of Modul 45 devices and the MPMT45 mounting plates for data sockets can be ordered separately. The holes on the side wall for the pipe entry have a diameter of 21 mm.

Mounting plate with 2x hole pattern Type B, 77x24x1,5, Stainless steel, grade 304, VA, 1.4301

MPMT45 2B mounting plate, for 2x Type B connectors 77x24x1.5 Stainless steel 1.4301, A2, 1.4301,

Mounting plate 2 x data socket type B for System 55. Mounting plate to accept two connection sockets for data technology of the following types BTR: E-DAT Modul; Dätwyler: MS and MS-N module; Kerpen: VarioKeystone.Dimensions of a mounting opening in mm: 19.35/21.55 x 14.85.

Mounting plate with 2x hole pattern Type F, 77x24x1,5, Stainless steel, grade 304, VA, 1.4301

MPMT45 2F mounting plate, for 2x Type F connectors 77x24x1.5 Stainless steel 1.4301, A2, 1.4301,

Mounting plate 2 x F-type data sockets for system 55. Cap for mounting 2 data connectors of the following types: Avaya/Systimax: M-Serie. Mounting opening dimensions in mm: 17.40 x 16.60.

BUCKET GT2 CEE16

Cuvette, with CEE16 socket, 175x75x128, galvanized steel in band, DIN EN 10346

Device support for CEE installation, system length 165 mm, with CEE. Device support of nominal size 2 with a CEE plug connection 16 A for installation in service outlets and cassettes of nominal size 2, 4, 6 and R7. Device support with protective housing and strain relief. Required minimum installation depth: 190 mm when using a straight connector and 160 mm when an angled connector is used.

BUCKET GT3 EEC

Cuvette, for CEE16 and CEE32, 218x75x128, galvanized steel in band, DIN EN 10346

GT3 EEC 7407669 Beams mounting apparatus EEC, length of system 208 mm, without EEC

SEPTUM SEPARATOR P/UT34, UT34 TW

Partition separator for UT34 72x29x4 black graphite 9011 Polyamide, PA

Partition. Partition for universal support to separate current types and circuits.

SUPPORT UNIÓNVERSAL P/INSTALLATION MODUL45, UT4

Universal cuvette for mechanisms 208x76x36 black graphite 9011 Polyamide, PA

UT4 universal support, without cover plate, system length 208 mm. Universal support with two strain reliefs for electrical installation in device installation units of nominal sizes R7, R9 and 9.Cover plates and accessories should be ordered separately.

FLOOR BOX KIT LID PLAS V 8M

Standard floor boxes in kit for sockets in vertical position - 8 modules

Mounting plate with 2x hole pattern Type B, 116x36x34, Stainless steel, grade 304, VA, 1.4301

Mounting support, 2 x type B. Mounting support to accept two data connection modules of the following types BTR: E-DAT; Dätwyler: MS and MS-N; Kerpen: VarioKeystone.Dimensions of a mounting opening in mm: 19.35/21.55 x 14.85.

Mounting plate for GE2F with 2x hole pattern Type F, Stainless steel, grade 304, VA, 1.4301