Accessories/spare parts for surge protection data networks/MCR-technology

1050283

VAL-MS 320 RW ST

-

Type 2 surge protection plug

Plug-in type 2 surge protection with high-power varistor for VAL-MS base element, with thermal control, optical fault indication. Version: 320 V AC with increased lightning current shunt capability.

2907845

TTC-6P-2-HC-24DC-I-P

-

Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit with a high nominal current. Nominal voltage: 12 V DC

Pluggable surge protection with status indication integrated into the module for a potential-free 2-wire signal circuit with a high rated current. Rated voltage: 24 V DC

Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit with high nominal current. Nominal voltage: 24 V DC

2702258

TC EXTENDER PT-IQ-2S

-

Surge protection plug

Interchangeable Surge Protection Module, for Ethernet Extender TC EXTENDER 6004 ETH-2S (2702255) only, 2 x SHDSL ports, dual conductor protection for SHDSL cables driven without ground potential, two-level protection connection

2765521

SVP 3E-110AC

-

Gas-filled surge arrester

3-electrode gas discharger, rated voltage: 110 V AC

3-electrode gas-filled surge arrester, nominal voltage: 110 V AC

2765534

SVP 2E-110AC

-

Gas-filled surge arrester

H Construction Mode Two-Electrode Gas Discharger, Rated Voltage: 110 V AC

2-electrode gas-filled surge arrester the type H, nominal voltage: 110 V AC

2788919

SVP 2E-48AC

-

Gas-filled surge arrester

H Construction Mode Two-Electrode Gas Discharger, Rated Voltage: 48 V AC

2-electrode gas-filled surge arrester the design H, nominal voltage: 48 V AC

2803137

CN-UB/MP-90DEG-50

-

Mounting plate

Angle flange for individual clamping of CN-UB..., e.g. on housing walls.

Angled bracket for individually fixing CN-UB... to housing panels, for example.

2818135

CN-UB/MP

-

Mounting plate

Link for the individual clamping of CN-UB..., e.g. on housing walls.

Tongue for attaching the CN-UB..., to housing panels, for example.

2818203

CN-UB-G1

-

Gas-filled surge arrester

Replacement Gas Unloader for CN-UB-280DC...

Replacement Gas Unloader for CN-UB-280DC...

2839208

PT 2X2-BE

-

Surge protection base element

PT plug-in protection base element with protection circuit for two 2-conductor signal circuits without earth potential, bridge between connections 3-4 (GND) and 9-10, mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm

2839224

PT 2X2+F-BE

-

Surge protection base element

PT plug-in protection base element with protection circuit for two two-conductor signal circuits without earth potential, gas discharger between connections 3-4 (GND) and 9-10, mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm

2839279

PT 2XEX(I)-BE

-

Surge protection base element

PT plug-in protection base element with protection circuit for two two-conductor EEx ia signal circuits without earth potential. Mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm

PT plug-in protection base element with protection circuit for two two-conductor EEx ia signal circuits without earth potential. Mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm

2839363

PT 4X1-BE

-

Surge protection base element

PT plug-in protection base element with protection circuit for 4 conductors of signal circuits with unilateral ground, bridged between connections 3-4 (GND) and 9-10, mounted on NS 35/7.5 and NS 35/15, housing width: 17.5 mm

2839376

PT 4X1+F-BE

-

Surge protection base element

PT plug-in protection base element with protection circuit for four signal conductors, with gas arrester between connections 3-4 (GND) and 9-10, mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm

2839402

PT 4-BE

-

Surge protection base element

PT plug-in protection base element with protection circuit for a 4-conductor signal circuit without earth potential, bridge between connections 3-4 (GND) and 9-10, mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm

Basic element for the PT protective plug with protection circuit for a four-conductor signal circuit with zero earth potential, jumper between connections 3-4 (GND) and 9-10, mounting on NS 35/7.5 and NS 35/15, housing thickness: 17.5 mm

2839415

PT 4+F-BE

-

Surge protection base element

PT plug-in protection base element with protection circuit for a four-conductor signal circuit without earth potential, gas discharger between connections 3-4 (GND) and 9-10, mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm

PT plug-in protection base element with protection circuit for a four-conductor signal circuit without earth potential, gas discharger between connections 3-4 (GND) and 9-10, mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm

2856113

PT 1X2-BE

-

Surge protection base element

PT plug-in protection base element with protection circuit for a two-conductor signal circuit with no earth potential. Mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm.

PT plug-in protection base element with protection circuit for a two-conductor signal circuit with no earth potential. Mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm.

2856126

PT 1X2+F-BE

-

Surge protection base element

PT plug-in protection base element with protection circuit for a two-conductor signal circuit with no earth potential. Integrated gas discharger as sufficient protection between GND and PE. Mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm.

2856265

PT PE/S+1X2-BE

-

Surge protection base element

PT plug-in protection base element with surge protection for power supply and a 2-conductor signal circuit without earth potential, rail mounting NS 35/7.5 and NS 35/15, housing width: 17.5 mm

2880192

D-LAN-19"-D-P

-

Surge protection PCB

Replacement printed circuit board for the products ""D-LAN-19""..."". Card with four surge-protected ports for data interfaces according to cat.5/EN 50 17 3 (100Base-T), incl. RJ45 connection females.

2905023

PT-IQ-EX-L-PP

-

Separating plate

Spacer plate for NS-35/7.5 rails to ensure the 50 mm wire dimension between the controller and the surge protection in PT-IQ-EX systems.

2905024

PT-IQ-EX-H-PP

-

Separating plate

Spacer plate for NS-35/7.5 rails in insulated construction (the rail is insulated by an "AB/NS" trestle) to ensure the 50 mm wire dimension between the controller and the surge protection in PT-IQ-EX systems.

5098470

VB-MDP 10-MD

-

Earthing strip for lightning barrier w. cover, Copper, Cu

Earthing strip. Connecting bridge for 8 mm lightning barriers• Length of bridge can be adjusted• Material: Copper• Allows quick equipotential bondingApplication: Parallel switching of the MDP lightning barriers

5084032

LSA-E

-

BAR LAND COMBINED P/LSA PLUS

LSA earthing rail. Earth rail as earth connection between surge protectors LFS-BF... (1 DA) and distributor connector LSA-...-LEI.Earthing rail for connection of the surge protection devices LSA-BF-180 and LSA-BF-24 to the equipotential bonding.

2702257

TC EXTENDER PT-IQ-1S

-

Surge protection plug

Interchangeable Surge Protection Module, for TC EXTENDER 4001 ETH-1S Ethernet Extender (2702253) only, 1 x SHDSL port, dual conductor protection for SHDSL cables driven without ground potential, two-level protection connection

1011977

TTC-EX-PP

-

Separating plate

Spacer plate for NS-35/7.5 rails to ensure the 50 mm wire dimension between the remote warning module and surge protection in TTC-EX systems.

Partition plate for NS-35/7,5 DIN rails to ensure a clearance of 50 mm between the remote signaling module and surge protection in TTC-EX systems.

1106015

TTC-6P-4-24DC-I-P

-

Plug-in surge protection with status indication integrated into the module for a floating 4-wire signal circuit with a high rated current. Rated voltage: 24 V DC

Plug-in surge protection with status indication integrated into the module for a floating 4-wire signal circuit with a high rated current. Rated voltage: 24 V DC

1635590

TTC-6P-4-GDT-24DC-I-P

-

Pluggable surge protection with status indication integrated into the module for three or four signal conductors. Protection circuit only with gas arresters. Nominal voltage: 24 V DC. Can be used in safety-oriented circuits up to SIL 3.