SWD4-3LF8-24-2S 116027 EATON MOELLER plano Cable SWD Ver maior
As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

SWD4-3LF8-24-2S 116027 EATON MOELLER plano Cable SWD

SWD4-3LF8-24-2S

116027

EATON - MOELLER

Disponível

Envio hoje

plano Cable - SWD

Mais detalhes


Relés Programáveis

SmartWire-DT

SmartWire-DT - EATON - MOELLER

* Produto novo em sua embalagem original com todas as garantias e certificações de EATON - MOELLER

QuantidadePreço
1+$9.97
19+$8.38
38+$8.17
57+$8.07
76+$8.00
*Este preço é por unidade e mostra o valor líquido (excluindo impostos indirectos se aplicável).

Como funciona

Como é que isso funciona?

1 Adicione os produtos de sua escolha ao carrinho de compras
2 Introduza os seus dados de contato e envie sua solicitação
3 Você será notificado por e-mail com a nossa cotação
4 Você simplesmente aceite o orçamento e espere a sua encomenda

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Produtos relacionados

Mais informação



Delivery programme
Product range
  SmartWire-DT accessories
Basic function
  SWD ribbon cable
Function
  For connecting the SmartWire-DT modules within the control panel
Description
  8 pole
prefabricated with two blade terminals SWD4-8MF2
Length
 m3
Note regarding length
  1 off
Connection to SmartWire-DT
  yes
For use with
  EU5C-SWD…
EU5E-SWD…
M22-SWD…
DIL-SWD…
Protection type (IEC/EN 60529, EN50178, VBG 4)
  IP20
Technical data
Ambient conditions, mechanical
Protection type (IEC/EN 60529, EN50178, VBG 4)
  IP20
Climatic environmental conditions
Condensation
  Take appropriate measures to prevent condensation
Relative humidity, non-condensing (IEC/EN 60068-2-30)
 %5 - 95
Design verification as per IEC/EN 61439(Show features)(Hide features)
Technical data for design verification
   
Rated operational current for specified heat dissipation
InA0
Heat dissipation per pole, current-dependent
PvidW0
Equipment heat dissipation, current-dependent
PvidW0
Static heat dissipation, non-current-dependent
PvsW0
Heat dissipation capacity
PdissW0
IEC/EN 61439 design verification
   
10.2 Strength of materials and parts
   
10.2.2 Corrosion resistance
  Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
  Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
  Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
  Meets the product standard's requirements.
10.2.5 Lifting
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
  Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
  Meets the product standard's requirements.
10.4 Clearances and creepage distances
  Meets the product standard's requirements.
10.5 Protection against electric shock
  Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
  Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
  Is the panel builder's responsibility.
10.8 Connections for external conductors
  Is the panel builder's responsibility.
10.9 Insulation properties
   
10.9.2 Power-frequency electric strength
  Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
  Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
  Is the panel builder's responsibility.
10.10 Temperature rise
  The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
  Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
  Is the panel builder's responsibility.
10.13 Mechanical function
  The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 6.0(Show features)(Hide features)
Cables and wires unpreassembled (EG000001) / Data cable (EC000830)
Electric engineering, automation, process control engineering / Cable, wire / Communication cable / Data cable ([email protected] [AKE197011])
Conductor material
  Cu, tinned
Diameter conductor
 mm1.35
Nominal cross section conductor
 mm²0.23
AWG-size
  24
Conductor category
  Class 2 = stranded
Number of cores
  8
Stranding element
  No
Core insulation
  PVC
Core identification
  Colour
Screen over stranding element
  None
Screen over stranding
  None
Material outer sheath
  PVC
Colour outer sheath
  Green
Halogen free (acc. EN 60754-1/2)
  Yes
Flame retardant
  In accordance with EN 60332-1-2
Low smoke (acc. EN 61034-2)
  No
Outer diameter approx.
 mm17.5
Permitted cable outer temperature, in movement
 °C-10 - 105
Permitted cable outer temperature, fixed
 °C-30 - 105
Category
  -
NVP value
 %66.7
Approvals
UL File No.  E29184
UL Category Control No.  NKCR
CSA File No.  2324643
CSA Class No.  3211-07
North America Certification  UL listed, CSA certified
Specially designed for North America  No

Datasheet - PDF

Avaliações: (0)

Não há comentários do produto ainda.

Adicionar avaliação
ocultar formulário
Avaliação:
Nome:
Email:
Título:
Opinión:
  Captcha
  Adicionar avaliação
Você tem dúvidas com a compra?

Se você tiver dúvidas compra, você pode visitar os seguintes links ou e-mail

Espere por favor





* Campos obrigatórios

ou