B5X-TEMDIS CARLO GAVAZZI Parametri selezionati Altro INFO1 Indicatore temperatura INFO3 SH Controllore

Eunica Temperature Controller
B5X-TEMDIS
smart-house temperature controller with display Developed to fit into wall socket from Elko, Gira and Jung Shows current room temperature
Shows outdoor temperature
Turns on/off heating and cooling
Set wanted room/floor temperature
Energy Save through night setback temperature Channel Programming using BGP-COD-BAT Optional floor sensor
Delivered with pre-programmed address on I/O 2
Delivered with both white and black pushbutton covers
Non-activated inputs and backlight indicated by white light
White LED and white backlight can be de-activated by internal dip switches
Activated inputs indicated by blue light
GENERAL SPECIFICATIONS
Channel programming By BGP-COD-BAT and special cable: GAP-TPH-CAB. After mounting, reprogramming can be done by removing the slim pushbutton cover and connecting the cable to the connector on the back of the switch element.
No. of channels 2 needed + 3 Optional
Channel assignment I/O 1: Not programmed I/O 2: Pre-programmed to address B2
I/O 3: Not programmed I/O 4: Not programmed I/O 5: Not programmed
Enclosure Eunica 55 x 55 mechanics
Environment
Degree of protection IP 20
Pollution degree 3 (IEC 60664)
Operating temperature 0° to +50°C (32° to +122°F) Storage temperature -20° to +70°C (-4° to +158°F)
Humidity (Non condensing) 20 - 80% Weight 33 g Dimensions
Eunica (WxHxD) 55 x 55 x 25 mm
Max. wire in terminals Max. 2 x 0.75 mm2
SUPPLY SPECIFICATIONS
Power supply Supplied by smart-house
Consumption (typical)
Activated (guidelight OFF) 1.5 mA Activated (guidelight ON) 2 mA Not activated (guidelight OFF) 0.6 mA Not activated (guidelight ON) 1.1 mA
TYPE SELECTION
Supply Ordering no.
By smart-house bus B5X-TEMDIS
Delivered with both white and black pushbutton covers. Frame not included.
Floor sensor BSO-TEMDIG is not included.
INPUT SPECIFICATIONS Sensor 1 integrated temperature sensor Range 0 - 50°C (32 - 122°F)
Precision ± 1°C
Floor sensor (not included) Temperature range 0 - 50°C (32 - 122°F) Cable length 4 m
Cable consists of 4 wires:
Brown Connect to “+” on Temperature controller
White Connect to “c” on Temperature controller
Yellow Connect to “d” on Temperature controller
Green Connect to “T” on Temperature controller
See wiring diagram
The floor sensor is an active 4-wire sensor and will only work together with the temperature controller unit.
Specifications are subject to change without notice (01.06.2010) - A product of the CARLO GAVAZZI Group