XN-GW-PBDP-12MB 140048 EATON MOELLER Gateway, Profibus 12MB, 85 50,225,161 View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

XN-GW-PBDP-12MB 140048 EATON MOELLER Gateway, Profibus 12MB, 85 50,225,161

XN-GW-PBDP-12MB

140048

EATON - MOELLER

Available

Ship on today

Product on demand only, returns will not be accepted.

Gateway, Profibus 12MB, 85 50,225,161

More details


Programmable Logic Controllers Plcs

EC4E & XI/ON Remote I/O system - EATON - MOELLER

Gateways - EATON - MOELLER

* Brand new produt in its original packing covered by the warranties and certifications provided by EATON - MOELLER

QuantityPrice
1+$339.24
2+$331.52
3+$327.96
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Delivery programme
Function
  Gateways XI/ON
Function
  XN gateway without integrated supply
Short Description
  supports up to 74 disc-type modules (XN)
1 x 9-pole SUB-D socket
Address setting with two hexadecimal rotary coding switch
Address range: 1 – 125 (dec.)
Field bus connection
  PROFIBUS-DP (DPV0 protocol)
Service interface
  PS/2 socket
Data transfer rate
  9.6 Kbit/s to 12 Mbit/s
Instructions The supply module XN-BR-24VDC-D must be mounted immediately next to the gateway to provide the supply for the gateway.
Information about equipment supplied The delivery package for all gateways includes: 2 x end bracket XN-WEW-32/2-SW, 1 x end plate XN-ABPL
Technical data
General
Standards
  EN 61000-6-2
EN 61000-6-4
EN 61131-2
Potential isolation
  Yes, through optocoupler
Ambient temperature
 °C0 - +55
Storage
ϑ°C-25 - +85
Relative humidity
  5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C)
Harmful gases
 ppmSO2: 10 (rel. humidity < 75%, no condensation)
H2S: 1.0 (rel. humidity < 75 %,no condensation)
Vibration
  according to IEC/EN 60068-2-6
Mechanical shock resistance
 gaccording to IEC 60068-2-27
Continuous shock resistance (IEC/EN 60068-2-29)
  According to IEC 60068-2-29
Drop and topple
  According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Degree of Protection
  IP20
Electromagnetic compatibility (EMC)
   
ESD
 kVEN 61100-4-2
Electromagnetic fields
 V/mEN 61100-4-2
Burst
  EN 61100-4-4
Surge
  EN 61100-4-5
Radiated RFI
  VEN 61100-4-6
Emitted interference (radiated, high frequency)
 dBEN 55016-2-3
Voltage fluctuations/voltage dips
  EN 61131-2
Type test
  to EN 61131-2
Approvals
  CE, cULus
Static heat dissipation, non-current-dependent
PvsW2.5
Other technical data (sheet catalogue)
  >Technical Data
Terminations
Rated data
  according to VDE 0611 Part 1/8.92/IEC/EN 60947-7-1
Connection design in TOP direction
  Spring-loaded/screw terminal
Stripping length
 mm8
Clamping range
  max. 0.5 - 2.5 mm2
Connectable conductors
   
Solid
 mm20.5 - 2.5
Flexible without ferrule
 mm20.5 - 1.5
Flexible with ferrule
 mm20.5 - 1.5
Flexible with ferrule
 mm20.5 - 1.5
Gauge pin IEC/EN 60947-1
  A1
Networking
Bus
  PROFIBUS DP
Bus protocol
  PROFIBUS-DPV0
Maximum station configuration
  74 cards (XN) of slice design or max. length of station: 1 m
System supply
UsysV DC24 /5
Operational voltage
 V DC5 (from bus refreshing module)
Admissible range
  4.7-5.3 V DC
Residual ripple
 %According to EN 61131-2
Rated current consumption from module bus
IMBmA
Technical data for design verification
   
Rated operational current for specified heat dissipation
InA0
Heat dissipation per pole, current-dependent
PvidW0
Equipment heat dissipation, current-dependent
PvidW0
Static heat dissipation, non-current-dependent
PvsW2.5
Heat dissipation capacity
PdissW0
Operating ambient temperature min.
 °C0
Operating ambient temperature max.
 °C55
Degree of Protection
  IP20
IEC/EN 61439 design verification
   
10.2 Strength of materials and parts
   
10.2.2 Corrosion resistance
  Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
  Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
  Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
  Meets the product standard's requirements.
10.2.5 Lifting
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
  Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
  Meets the product standard's requirements.
10.4 Clearances and creepage distances
  Meets the product standard's requirements.
10.5 Protection against electric shock
  Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
  Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
  Is the panel builder's responsibility.
10.8 Connections for external conductors
  Is the panel builder's responsibility.
10.9 Insulation properties
   
10.9.2 Power-frequency electric strength
  Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
  Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
  Is the panel builder's responsibility.
10.10 Temperature rise
  The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
  Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
  Is the panel builder's responsibility.
10.13 Mechanical function
  The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 4.0(Show features)(Hide features)
Supply voltage AC 50 Hz
 V0 - 0
Supply voltage AC 60 Hz
 V0 - 0
Supply voltage DC
 V18 - 30
Voltage type of supply voltage
  DC
Supporting protocol in-bound for TCP/IP
  No
Supporting protocol in-bound for PROFIBUS
  Yes
Supporting protocol in-bound for CAN
  No
Supporting protocol in-bound for INTERBUS
  No
Supporting protocol in-bound for ASI
  No
Supporting protocol in-bound for EIB/KNX
  No
Supporting protocol in-bound for MODBUS
  No
Supporting protocol in-bound for Data-highway
  No
Supporting protocol in-bound for DeviceNet
  No
Supporting protocol in-bound for SUCONET
  No
Supporting protocol in-bound for LON
  No
Supporting protocol in-bound for SERCOS
  No
Supporting protocol in-bound for PROFINET IO
  No
Supporting protocol in-bound for PROFINET CBA
  No
Supporting protocol in-bound for Foundation Fieldbus
  No
Supporting protocol in-bound for EtherNet/IP
  No
Supporting protocol in-bound for AS-Interface Safety at Work
  No
Supporting protocol in-bound for DeviceNet Safety
  No
Supporting protocol in-bound for INTERBUS-Safety
  No
Supporting protocol in-bound for PROFIsafe
  No
Supporting protocol in-bound for SafetyBUS p
  No
Supporting protocol in-bound for other bus systems
  No
Supporting protocol out-bound for TCP/IP
  No
Supporting protocol out-bound for PROFIBUS
  Yes
Supporting protocol out-bound for CAN
  No
Supporting protocol out-bound for INTERBUS
  No
Supporting protocol out-bound for ASI
  No
Supporting protocol out-bound for EIB/KNX
  No
Supporting protocol out-bound for MODBUS
  No
Supporting protocol out-bound for Data-highway
  No
Supporting protocol out-bound for DeviceNet
  No
Supporting protocol out-bound for SUCONET
  No
Supporting protocol out-bound for LON
  No
Supporting protocol out-bound for SERCOS
  No
Supporting protocol out-bound for PROFINET IO
  No
Supporting protocol out-bound for PROFINET CBA
  No
Supporting protocol out-bound for Foundation Fieldbus
  No
Supporting protocol out-bound for EtherNet/IP
  No
Supporting protocol out-bound for AS-Interface Safety at Work
  No
Supporting protocol out-bound for DeviceNet Safety
  No
Supporting protocol out-bound for INTERBUS-Safety
  No
Supporting protocol out-bound for PROFIsafe
  No
Supporting protocol out-bound for SafetyBUS p
  No
Supporting protocol out-bound for other bus systems
  No
Radiostandard Bluetooth
  No
Radiostandard WLAN 802.11
  No
IO link master
  No
System accessory
  Yes
Degree of protection (IP)
  IP20
With potential separation
  Yes
Fieldbus connection over separate bus coupler possible
  Yes
Rail mounting possible
  Yes
Wall mounting/direct mounting
  No
Front build in possible
  No
Rack-assembly possible
  No
Suited for safety functions
  No
Safety class according to DIN V 19250
  0
Category according to EN 954-1
  -
SIL according to IEC 61508
  0
SIL according to IEC 62061
  0
Performance level acc. to EN ISO 13849-1
  -
Appendant operation agent (Ex ia)
  No
Appendant operation agent (Ex ib)
  No
Explosion safety category for gas
  None
Explosion safety category for dust
  None
Width
 mm50.6
Height
 mm114.8
Depth
 mm74.4
Approvals
Product Standards  UL 508; CSA-C22.2 No. 142; IEC/EN 6113-2; CE marking
UL File No.  E205091
UL Category Control No.  NRAQ, NRAQ7
CSA File No.  UL report applies to both US and Canada
CSA Class No.  2252-01, 2252-81
North America Certification  UL recognized, certified by UL for use in Canada
Specially designed for North America  No
Current Limiting Circuit-Breaker  No
Degree of Protection  IEC: IP20, UL/CSA Type: -
Dimensions
MN05002004Z User manual XI/ON gateways for Profibus-DP
 
>
>>

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or