SFCP156 nVent HOFFMAN Partial swing frame, 800 SFCP156

Description:

Partial height swing frame for 19”-components allowing left or right hand opening. Can be used in wall mounted, steel enclosures, and floor standing, combinable and compact, steel enclosures. Rigid S-shaped frame profile equipped with 19” hole pattern in front and back. Zinc plated frame for direct earthing of the mounted components. Standard opening angle 125°-155°. Mounting in wall mounted, steel enclosures requires the SFBP transversal support in combination with the AVB. Mounting in floor standing steel combinable enclosures requires the SFBP transversal support.

Lock:

1 double-bit 3 mm lock.

Material:

2 mm zinc plated steel.

Pack quantity:

1 swing frame with hinges.

Mounting requirements:

Mounting in wall mounted, steel enclosures requires the SFBP transversal support in combination with the AVB. Mounting in floor standing steel combinable enclosures requires the SFBP transversal support. Adjustable in depth in combination with CLPK profiles.

Feature:

Partial height swing frame, for wall mounted and floor standing enclosures.

Advantage:

Additional surface for the installation of 19" equipment, within a hinged frame. The frame can be mounted within enclosures from 600mm in width and to the desired height.

Benefit:

The frame allows customers to install equipment and components into floor standing enclosures efficiently by maximising the installation space available. Access can be gained to the front and rear of the equipment installed in the frame, as well as to the components installed behind on the mounting plate, when the frame is opened.

Comment:

The partial transversal support bars, SFBP, must be mounted in combination with the partial height swing frame.