> EATON - MOELLER>Автоматические выключатели в литом корпусе NZM >NZM4-X2A 189723 ELECTRIC Релейный модуль для NZM4, конфигурируемый, 2NO, 24DC, 24-230AC, PI
Предыдущий товар Следующий продукт
NZM4-X2A 189723 EATON ELECTRIC Релейный модуль для NZM4, конфигурируемый, 2NO, 24DC, 24-230AC, PI Увеличить
Изображения носят исключительно иллюстративный. Пожалуйста, ознакомьтесь с техническим паспортом.

NZM4-X2A 189723 EATON ELECTRIC Релейный модуль для NZM4, конфигурируемый, 2NO, 24DC, 24-230AC, PI

NZM4-X2A

189723

Y7-189723

EATON-MOELLER

Релейный модуль для NZM4, конфигурируемый, 2NO, 24DC, 24-230AC, PI

Relay module for NZM4, configurable, 2NO, 24DC, 24-230AC, PI

Подробнее


Автоматические выключатели в литом корпусе NZM

* Новый продукт в оригинальной упаковке со всеми гарантиями и сертификатами EATON-MOELLER

Общая стоимость: $175.31
Цена за единицу: $175.31

Кол-во цена
1+$175.31
2+$173.74
*Эта цена за единицу и является чистая стоимость (не включая налоги, если это применимо).

Если наша цена не самая лучшая, попросите нас о цене бюджетный запрос

Best sellers

▲

Описание

▲


Relay module for NZM4, configurable, 2NO, 24DC, 24-230AC, PI
Optional accessories for the circuit-breaker series NZM offers a comprehensive portfolio of application options for use world wide. The mounting is always flexible and easy thanks to the modular function groups. Notes: Relais modules with two relays. For signalizing commands or different states of the circuit-breaker. Two relays per unit. Actuation reason can be configured in the trip unit. Configuration via communication or circuit breaker display or front USB connection and Eaton Power Xpert Protection Manager. Only suitable for use in conjunction with circuit-breakers with electronic releases. Relais modules cannot be installed simultaneously with early-make contact NZM…-XHIV, or untervoltage release NZM…-XU…, or shunt release NZM…-XA… Relay coil actuated by trip unit. Relay contact for control wiring. Control wiring to push-in terminals. Cannot be used with PXR10 NZM-AE electronic release.

Delivery program

Product range
Accessories
Accessories
Relay module l
Accessories
Relay module
Standard/Approval
UL/CSA, IEC
Construction size
NZM4
Description
For signalizing commands or different states of the circuit-breaker.
Two relays per unit.
The activation criteria can be configured in the trip unit.
Configuration via communication or circuit breaker display or front USB port and Eaton Power Xpert Protection Manager.
Only for use in combination with circuit-breakers with electronic trips.
Relay components cannot be installed simultaneously with make-before-break auxiliary breaker NZM...-XHIV, the under-voltage trip NZM...-XU.... or the shunt trip NZM...-XA....
Relay contacts for control wiring.
Relays can be used for controlling remote operator with Us=208-204 V AC.
Control wiring on push-in clamps.
Cannot be used with the PXR10 NZM-AX electronic trip.
Connection type
with push in terminal
For use with
PXR20(25) NZM4(-4)-..X…
Number of relays
2
Contact sequence
1230SWI-146

Technical data

Relay contacts
Rated control voltage [Us]AC [Us]
24-240 V AC
Rated control voltage [Us]DC [Us]
24-24 V DC
ContactsRated impulse withstand voltage [Uimp]
4000 V AC
ContactsRated insulation voltage [Ui]
250 V
ContactsOvervoltage category/pollution degree
III/3
Switching capacityRated operational currentAC–124 V [Ie]
1 A
Switching capacityRated operational currentAC–1110 V [Ie]
1 A
Switching capacityRated operational currentAC–1230 V [Ie]
1 A
Switching capacityRated operational currentDC-124 V [Ie]
1 A
Switching capacityMin. switching capacity (reference value)
10 ma / 12 V
ConnectionStripping length
8 mm
ConnectionTerminal capacitySolid
1 x (0.2 – 1.5) mm2
ConnectionTerminal capacityStranded
1 x (0.25 – 1.5) mm2
ConnectionTerminal capacity
1 x (24 - 16) AWG
ConnectionTerminal capacitywith insulated end sleeve in accordance with DIN46224 / 4
1 x (0,25 - 1,5) mm2
ConnectionTerminal capacitywith uninsulated end sleeve in accordance with DIN46228 / 1
1 x (0,25 - 0,75) mm2

Design verification as per IEC/EN 61439

IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 8.0

Low-voltage industrial components (EG000017) / Accessories/spare parts for low-voltage switch technology (EC002498)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Component for low-voltage switching technology / Component for low-voltage switch technology (accessories) ([email protected] [AKN570013])
Type of accessory/spare part
Other
Accessory
Yes
Spare part
No

Approvals

Product Standards
UL489; CSA-C22.2 No. 5-09; IEC60947, CE marking
UL File No.
E140305
UL Category Control No.
DIHS
CSA File No.
022086
CSA Class No.
1437-01
North America Certification
UL listed, CSA certified

Datasheet - PDF

▲
Заглавие: Размер: Тип:
PDF CATALOGUE EATON EN.pdf 51 Mbytes
NZM4-X2A 189723 RU_189723.pdf 182 Kbytes NZM4-X2A 189723 RU_189723.pdf

Отзывы: (0) ▲

Там нет Отзывы о товаре пока нет.

Добавить отзыв
Добавить отзыв
скрыть форму
Рейтинг:
Имя:
Эл. адрес:
Предмет:
Текст:
Вы рекомендуете этот продукт купить?
  Captcha
  Добавить отзыв

Последние отзывы клиентов.

Все оценки, которые мы получаем о артикулах, которые мы предлагаем, являются реальными и проверенными. Маленький жест, но очень ценный. Вот почему мы благодарим Вас за ту минуту, которую Вы инвестируете в то, чтобы оставить нам свое мнение о продуктах, это помогает нам продолжать совершенствоваться и предлагать Вам услугу еще более высокого качества.