IB IL 400 ELR 1-3A 2727352 PHOENIX CONTACT Módulo Inline Ver maior
As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

IB IL 400 ELR 1-3A 2727352 PHOENIX CONTACT Módulo Inline

IB IL 400 ELR 1-3A

2727352

PHOENIX_CONTACT

Módulo Inline

Terminais de alimentação em linha, controlador de partida eletrônico de até 1,5 kW / 400 V AC

Inline power-level terminal blocks, electronic direct starter, up to 1.5 kW / 400 V AC

Mais detalhes


E / S

Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT

* Este artigo pode estar obsoleto. Se você estiver interessado, insira seu e-mail e informaremos se há unidades disponíveis. Caso não existam mais, um dos nossos técnicos procurará uma alternativa fornecivel com características semelhantes.

Se o nosso preço não é o melhor, peça-nos uma cotação Solicitar uma cotação

Best sellers

Mais informação



Dados técnicos

Dimensions
Dimensional drawingkghukubziv.jpg
Width63 mm
Height224 mm
Depth109 mm

Interfaces
Inline local bus
Number of interfaces2
Connection methodInline data jumper
Transmission speed500 kbps
Transmission physicsCopper

System properties
Module
ID code (dec.)191
ID code (hex)BF
Length code (hex)81
Length code (dec)129
Process data channel8 bit
Input address area1 Byte
Output address area1 Byte
Register length1 Byte
Required parameter data5 Byte
Required configuration data5 Byte

Product properties
Product typeI/O component
Product familyInline
Typemodular
Mounting positionPanel mounting on horizontal DIN rail
Operating modeProcess data mode with one byte
Diagnostics messagesOvercurrent Error message in the diagnostic code (bus) and display via the LED ERR on the module
Output stage cannot be controlled Error message in the diagnostic code (bus) and display via the LED ERR on the module

Electrical properties
Potentials
Power consumptionmax. 1.2 W (entire device)
Potentials: Communications power (UL)
Supply voltage7.5 V DC (via voltage jumper)
Current drawmax. 45 mA
Power consumptionmax. 0.34 W
Potentials: Segment circuit supply (US)
Supply voltage24 V DC (via voltage jumper)
Supply voltage range19.2 V DC ... 28.8 V DC (including all tolerances, including ripple)
Current drawmax. 50 mA
Electrical isolation/isolation of the voltage ranges
Test voltage: Supply voltage UL/ 400 V level1.2 kV AC, 50 Hz, 1 min.
Test voltage: Supply voltage US/ 400 V level1.2 kV AC, 50 Hz, 1 min.
Test voltage: Supply voltage US/ brake control switch1.2 kV AC, 50 Hz, 1 min.
Test voltage: Supply voltage UL/ brake control switch1.2 kV AC, 50 Hz, 1 min.
Test voltage: Local bus/400 V level1.2 kV AC, 50 Hz, 1 min.
Test voltage: Local bus/Brake control switch1.2 kV AC, 50 Hz, 1 min.

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-25 °C ... 55 °C
NoteNotes on operation Line protection for the network supply line, max. 20 A. Observe derating of the POWER-COMBICON connector
Air pressure (operation)70 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-25 °C ... 85 °C
Permissible humidity (operation)10 % ... 85 % (non-condensing)
Permissible humidity (storage/transport)10 % ... 85 % (non-condensing)

Standards and regulations
Protection classI (IEC 61140, EN 61140, VDE 0140-1)

Mounting
Mounting typeDIN rail mounting
Assembly noteTo safeguard sufficient ventilation, ensure that there is an installation clearance of a minimum of 50 cm both above and below.
Mounting positionPanel mounting on horizontal DIN rail

Datasheet - PDF

Avaliações: (0)

Não há comentários do produto ainda.

Adicionar avaliação
ocultar formulário
Avaliação:
Nome:
Email:
Título:
Opinión:
  Captcha
  Adicionar avaliação

Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.