SACC-DSI-MS-3CON-M16/0,5-18AWG 1019750 PHOENIX CONTACT Conector

SACC-DSI-MS-3CON-M16/0,5-18AWG

1019750

PHOENIX_CONTACT

100

Conector

Mais detalhes


Conexão de dispositivos de campo

* Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT

*Este preço é por unidade e mostra o valor líquido (excluindo impostos indirectos se aplicável).

Se o nosso preço não é o melhor, peça-nos uma cotação Solicitar uma cotação

PRODUTOS VISUALIZADOS


Mais informação



Dados comerciais

Chave de encomenda1019750
Quantidade de embalagem1
GTIN (EAN)4055626514789
Número do imposto alfandegário85444290

Dimensions

Fixed cable length0.5
Voltar para cima

Ambient conditions

Ambient temperature (operation)-25 ... -85
Voltar para cima

General

Standards/regulationsaccording to IEC 61076-2-101
Insertion/withdrawal cycles> 100
Overvoltage categoryII
Mounting typeRear wall/screw mounting
CodingA-coded
Thread typeM16 x 1.5
Cable cross section0.75
Rated surge voltage2.5 kV AC
Degree of pollution3
Degree of protectionIP67
Number of positions4
Current4 A
Voltage250 V
Voltar para cima

Connection data

Connection methodIndividual wires
Voltar para cima

Standards and Regulations

Standards/specificationsaccording to IEC 61076-2-101
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• Only use tools recommended by Phoenix Contact
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Voltar para cima

Environmental Product Compliance

REACh SVHCLead 7439-92-1
China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Voltar para cima

Classificações

eCl@ss

eCl@ss 10.0.127440102
eCl@ss 8.027440103
eCl@ss 9.027440102
Voltar para cima

ETIM

ETIM 5.0EC002061
ETIM 6.0EC002061
Voltar para cima

Datasheet - PDF

Título: Tamanho: Tipo:
PDF CATALOG PHOENIX CONNECTORS EN.pdf 57 Mbytes

Avaliações: (0)

Não há comentários do produto ainda.

Adicionar avaliação
ocultar formulário
Avaliação:
Nome:
Email:
Título:
Opinión:
  Captcha
  Adicionar avaliação

Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.