ANUNCIAR
UW 10/S 3073335 PHOENIX CONTACT Borne de passagem Ver maior
As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

UW 10/S 3073335 PHOENIX CONTACT Borne de passagem

UW 10/S

3073335

PHOENIX_CONTACT

50

Borne de passagem

Régua de terminais de parede, tipo de conexão: Conexão roscada com cápsula de tração, Conexão roscada com cápsula de tração, número de polos: 1, corrente de carga: 57 A, seção transversal: 0,5 mm² - 16 mm², direção de conexão do condutor em relação à direção do plugue: 0 °, largura: 10,1 mm

Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Screw connection with tension sleeve, number of positions: 1, load current: 57 A, cross section: 0.5 mm2 - 16 mm2, connection direction of the conductor to plug-in direction: 0 °, width: 10.1 mm, color: gray

Mais detalhes


Blocos de terminais > Terminal de alimentação

Conectores PCB

Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT

Preço total: $323.12
Preço unitário: $6.46
Este preço é por unidade e mostra o valor líquido (excluindo impostos indirectos se aplicável).

Se o nosso preço não é o melhor, peça-nos uma cotação Solicitar uma cotação

Related products

Best sellers

Mais informação



Dados técnicos

Product properties
Product typePanel feed-through terminal block
Product familyUW 10
Number of positions1
Pitch10.1 mm
Number of connections2
Number of rows1
Number of potentials1
Data management status
Article revision03
Insulation characteristics
Overvoltage categoryIII
Degree of pollution3

Electrical properties
Nominal current IN57 A
Nominal voltage UN500 V
Rated voltage (III/3)500 V
Rated surge voltage (III/3)6 kV

Connection data
Connection technology
Connector systemUW 10
Nominal cross section10 mm²
Conductor connection exterior
Connection methodScrew connection with tension sleeve
Connection direction of the conductor to plug-in direction0 °
Conductor cross section rigid0.5 mm² ... 16 mm²
Conductor cross section flexible0.5 mm² ... 10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve0.5 mm² ... 10 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve0.5 mm² ... 10 mm²
2 conductors with same cross section, solid0.5 mm² ... 4 mm²
2 conductors with same cross section, flexible0.5 mm² ... 4 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve0.5 mm² ... 2.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve0.5 mm² ... 6 mm²
Internal cylindrical gageB6
Stripping length11 mm
Tightening torque1.5 Nm ... 1.8 Nm
Conductor connection interior
Connection methodScrew connection with tension sleeve
Connection direction of the conductor to plug-in direction0 °
Conductor cross section rigid0.5 mm² ... 16 mm²
Conductor cross section flexible0.5 mm² ... 10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve0.5 mm² ... 10 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve0.5 mm² ... 10 mm²
2 conductors with same cross section, solid0.5 mm² ... 4 mm²
2 conductors with same cross section, flexible0.5 mm² ... 4 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve0.5 mm² ... 2.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve0.5 mm² ... 6 mm²
Internal cylindrical gageB6
Stripping length11 mm
Tightening torque1.5 Nm ... 1.8 Nm

Material specifications
Material data - contact
NoteWEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact materialCu alloy
Surface characteristicstin-plated
Material data - housing
Color (Housing)gray (7042)
Insulating materialPA
Insulating material groupI
CTI according to IEC 60112600
Flammability rating according to UL 94V0
Glow wire flammability index GWFI according to EN 60695-2-12850
Glow wire ignition temperature GWIT according to EN 60695-2-13775
Temperature for the ball pressure test according to EN 60695-10-2125 °C

Notes
Safety note
Safety note• Only electrically qualified personnel may install and operate the product.
To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering.
• Observe the technical data provided here and refer to the documents listed under “Downloads”. The download area contains important information, such as installation notes, technical drawings, and 3D data.
• The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection.

Dimensions
Dimensional drawingddiurgchyv.jpg
Pitch10.1 mm
Width [w]10.1 mm
External dimensions
Width [w]10.1 mm
Height [h3]31 mm
Length [l1]29 mm
Internal dimensions
Width [w]10.1 mm
Height [h4]29 mm
Length [l2]23.5 mm

Mechanical tests
Test for conductor damage and slackening
SpecificationIEC 60947-7-1:2009-04
ResultTest passed
Pull-out test
SpecificationIEC 60947-7-1:2009-04
Conductor cross section/conductor type/tractive force setpoint/actual value0.5 mm² / solid / > 20 N
0.5 mm² / flexible / > 20 N
16 mm² / stranded / > 100 N
10 mm² / flexible / > 90 N

Electrical tests
Temperature-rise test
SpecificationIEC 60947-7-1:2009-04
Requirement temperature-rise testIncrease in temperature ≤ 45 K
Short-time withstand current
SpecificationIEC 60947-7-1:2009-04
Air clearances and creepage distances 1. Insulation coordination
Applicationwithout spacer plate
SpecificationIEC 60947-7-1:2009-04
Insulating material groupI
Comparative tracking index (IEC 60112)CTI 600
Rated insulation voltage (III/3)500 V
Rated surge voltage (III/3)6 kV
minimum clearance value - non-homogenous field (III/3)5.5 mm
minimum creepage distance (III/3)6.3 mm

Environmental and real-life conditions
Glow-wire test
SpecificationIEC 60695-2-11:2000-10
Temperature960 °C
Time of exposure30 s
Ambient conditions
Ambient temperature (operation)-40 °C ... 100 °C (Depending on the current carrying capacity/derating curve)
Ambient temperature (storage/transport)-40 °C ... 70 °C
Relative humidity (storage/transport)30 % ... 70 %
Ambient temperature (assembly)-5 °C ... 100 °C

Packaging specifications
Type of packagingpacked in cardboard

ETIM for 3073335 Bloco de terminais (EC001283)
Característica Valor
Secção de condutor de fio fino de ligação sem ponteira (EF007341) 0.5 mm²
Secção do condutor de fio fino de ligação com ponteira (EF007339) 0.5 mm²
Secção da ligação de cabo rígido (EF007337) 0.5 mm²
Secção da ligação de cabo flexível (EF007343) 0.5 mm²
Tensão especificada de funcionamento (EF000228) 500 V
Tipo de ligação elétrica 1 (EF002526) Ligação com parafuso
Tipo de ligação elétrica 2 (EF002527) Ligação com parafuso
Número de polos (EF001391) 1
Material do corpo isolante (EF007543) Outro
Classe de inflamabilidade do material de selagem de acordo com UL 94 (EF002521) V0
Cor (EF000007) Cinzento

Datasheet - PDF

Avaliações: (0)

Não há comentários do produto ainda.

Adicionar avaliação
ocultar formulário
Avaliação:
Nome:
Email:
Título:
Opinión:
  Captcha
  Adicionar avaliação

Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.