PHOENIX_CONTACT EMT (40X17)R 0817293 - Imagem 1

As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

EMT (40X17)R 0817293 PHOENIX CONTACT Plaqueta de encaixe

Referência: EMT (40X17)R

Código: 0817293

Fabricante: PHOENIX_CONTACT

Descrição:

Plaqueta de encaixe
Etiqueta inserível, Rolo, branca, não rotulada, rotulável com: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, classe de montagem: inserto, faixa de diâmetro do cabo: 16 ... 35 mm, área útil: 40x17mm, Número de índices individuais: 2300
Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: insert, cable diameter range: 16 ... 35 mm, Number of individual labels: 2300, text field height: 17 mm, text field width: 40 mm

Categorias:

  • Material auxiliar > Material de marcação
  • PHOENIX_CONTACT > Material MS

Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT

  • Mais informação
  • PDF
  • Avaliações
Garantia, reparação e devolução.

Preço unitário: 482,02 €

Este preço é por unidade e mostra o valor líquido (excluindo impostos indirectos se aplicável).

Calcule o preço por quantidade

QuantidadePreço

Prazo padrão: 2-3 semanas.

  • Estes prazos são estimativos e podem variar uma vez tratado o pedido do artigo.

MAIS INFORMAÇÃO

Dados técnicos

Product properties
Product typeDevice marking
Data management status
Article revision02
Marking
Number of individual labels2300
Number of individual labels per row2
Identification technologyThermal transfer for rolls

Mounting
Mounting typeinsert

Material specifications
RoHS compliantyes
Foil strength175 µm
Colorwhite (RAL 9010)
MaterialPolyester
Componentsfree from silicone and halogen

Environmental and real-life conditions
Test for substances that would hinder coating with paint or varnish
ResultTest passed
Scratch test for the determining scratch resistance
SpecificationDIN EN ISO 1518-1:2019-10 (following)
Requirements≥ 5 N
ResultTest passed
Tesafilm test
SpecificationDIN EN ISO 2409:2013 (following)
ResultTest passed
UV resistance
SpecificationISO 4892-2:2013-03 (following)
ResultTest passed
Test duration96 h
Temperature resistance
SpecificationANSI/UL 969-2018:03 (following)
Test duration240 h
Rating 200 °C (230 °C)Test passed
Wipe resistance of inscriptions
SpecificationDIN EN 61010-1 (VDE 0411-1):2011-07
DIN EN 62208 (VDE 0660-511):2012-06 (in parts)
Isopropyl
[CAS No. 67-63-0]
Test passed
n-Hexane
[CAS No. 110-54-3]
Test passed
Water + Petroleum ether
[CAS No. 64742-82-1]
Test passed
Sodium hydroxide 0.1 mol/l
[CAS No. 1310-73-2]
Test passed
Ethanol (99 %)
[CAS No. 64-17-5]
Test passed
SpecificationISO 175:2010 (following)
Test duration168 h
Sodium hydroxide 0.1 mol/l
[CAS No. 1310-73-2]
Test passed
Diesel
[CAS No. 68476-34-6]
Test passed
IRM 901Test passed
IRM 902Test passed
Testing in a condensation changing climate in the presence of sulfur dioxide
SpecificationDIN 50018:2013-05
ResultTest passed
Climate levelAHT 1.0 S
Cycles2
Salt spray test
SpecificationDIN EN 60068-2-11:2000-02
ResultTest passed
Test duration96 h
Ambient conditions
Ambient temperature (operation)-40 °C ... 120 °C
Recommended storage conditions23 °C / 50 % relative humidity
Recommended ambient temperature (storage/transport)23 °C
Recommended humidity (storage/transport)50 %
Shelf life2 years

Dimensions
Width40 mm
Text field width40.00 mm
Text field height17.00 mm
Length17 mm

Standards and regulations
Wipe resistanceDIN EN 61010-1 (VDE 0411-1)

DATASHEET - PDF

Últimas opiniões dos nossos clientes

Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.