Produto adicionado com sucesso ao seu carrinho de compras
EXTENDER 1010 ETH TP-G
1319321
PHOENIX_CONTACT
1
Extensor Gigabit Ethernet, expansão de rede via cabo de par trançado de até 1 quilômetro e largura de banda de até 1 GBit/s, função Power over Link (PoL) para fornecimento de energia para outros equipamentos via cabo de par trançado
Gigabit Ethernet extender, network extension via twisted pair cable up to 1 kilometer and bandwidth up to 1 Gbps, Power over Link (PoL) function for the power supply of additional devices via the twisted pair cable
Home > PHOENIX_CONTACT
* Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT
Obrigado pelo seu interesse nos nossos artigos, esperamos que o prazo indicado seja conveniente para si.
Durante a preparação do pedido pode seleccionar o tipo de envío que melhor se adapte ás suas necessidades: Aéreo Express 24Hrs, Terrestre Standard 48/72Hrs, etc.
Product type | Ethernet extenders |
MTTF | 294 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
144 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
61 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) | |
Insulation characteristics | |
Pollution degree | 2 |
Functionality | |
Basic functions | Gigabit Ethernet extender in accordance with ITU G.9960 |
Electrical isolation | VCC (US+GND) // Ethernet (PoE) // G.hn (without PoL) // FE |
Mains type | Permanent line |
Test voltage data interface/power supply | 1.5 kV AC (50 Hz, 1 min.) |
Supply | |
Supply voltage range | 18 V DC ... 57 V DC |
Nominal supply voltage | 24 V DC (Without PoL) |
48 V DC (With PoL) | |
Power consumption | ≤ 7.5 W (Without PoL) |
≤ 37.5 W (With PoL) | |
Protective circuit | Overload protection, protection against polarity reversal; Internal device protection: 2x 5 AF, internal series diode |
Cross section AWG | (converted acc. to IEC) |
Supply | |
Connection method | Push-in spring connection |
Conductor cross section flexible, with ferrule without plastic sleeve | 0.2 mm² ... 2.5 mm² |
Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.2 mm² ... 2.5 mm² |
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 1.5 mm² |
Single conductor/terminal point, rigid | 0.2 mm² ... 2.5 mm² |
≥ 0.5 mm² (PoL cables in accordance with DIN VDE 0100, part 523) | |
Single-wire/terminal point, flexible | 0.2 mm² ... 2.5 mm² |
≥ 0.5 mm² (PoL cables in accordance with DIN VDE 0100, part 523) | |
Conductor cross section, flexible [AWG] | 24 ... 16 |
Stripping length | 10 mm |
Signal | Ethernet |
Basic functions | Gigabit Ethernet extender in accordance with ITU G.9960 |
Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3 | |
Serial transmission speed | 10/100/1000 Mbps |
Connection method | RJ45 jack, shielded |
No. of channels | 1 |
Transmission length | < 100 m (shielded twisted pair) |
Protocols supported | Protocol-transparent for TCP/IP, IPv4, and IPv6 |
Data: G.hn interface in accordance with ITU G.9960 | |
Transmission speed | ≤ 1000 Mbps (Depending on the quality of the data line) |
Connection method | Push-in spring connection |
Transmission length | ≤ 1000 m (Depending on the quality of the data line) |
Single conductor/terminal point, rigid | 0.2 mm² ... 2.5 mm² |
Single-wire/terminal point, flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.2 mm² ... 2.5 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve | 0.2 mm² ... 2.5 mm² |
Max. AWG conductor cross section, flexible | 16 |
Min. AWG conductor cross section, flexible | 24 |
Stripping length | 10 mm |
Transmission method | QAM (quadrature amplitude modulation) carrier frequency method |
Output power | ≤ 74 W (With PoL) |
Width | 23 mm |
Height | 101 mm |
Depth | 115 mm |
Material | PA 6.6-FR |
Flammability rating according to UL 94 | V0 |
Ambient conditions | |
Degree of protection | IP20 |
Ambient temperature (operation) | -40 °C ... 60 °C (Free standing, without PoE) |
-40 °C ... 55 °C (Free standing, PoE up to 15 W) | |
-40 °C ... 50 °C (Free standing, PoE up to 30 W) | |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Altitude | ≤ 2000 m |
Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
CE | |
Certificate | CE-compliant |
Corrosive gas test | |
Identification | ISA-S71.04-1985 G3 Harsh Group A |
Noise immunity | EN 55035 |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Noise emission | EN 61000-6-4, Class A, industrial area of application |
Electrostatic discharge | |
Standards/regulations | EN 61000-4-2 |
Electrostatic discharge | |
Contact discharge | ± 6 kV |
Discharge in air | ± 8 kV |
Indirect discharge | ± 6 kV |
Comments | Criterion B |
Electromagnetic HF field | |
Standards/regulations | EN 61000-4-3 |
Electromagnetic HF field | |
Frequency range | 80 MHz ... 3 GHz (80% amplitude modulation with 1 kHz) |
Field intensity | 10 V/m |
Frequency range | 3 GHz ... 6 GHz (80% amplitude modulation with 1 kHz) |
Field intensity | 3 V/m |
Comments | Criterion A |
Fast transients (burst) | |
Standards/regulations | EN 61000-4-4 |
Fast transients (burst) | |
Input | ± 2.2 kV |
Signal | ± 2.2 kV (Ethernet, G.hn) |
Surge current load (surge) | |
Standards/regulations | EN 61000-4-5 |
Surge current load (surge) | |
Input | ± 0.5 kV (Symmetrical, unshielded supply line) |
± 1 kV (Asymmetrical, unshielded supply line) | |
Signal | ± 1 kV (Ethernet signal / asymmetrical: shielded Ethernet cable) |
± 4 kV (Ethernet signal / asymmetrical: cable to ground, unshielded G.hn cable) | |
± 2 kV (Ethernet signal / symmetrical: cable to cable, unshielded G.hn cable) | |
± 4 kV (Telecommunication lines, symmetrical, unshielded, with primary protection) | |
± 1 kV (Telecommunication lines, symmetrical, unshielded, without primary protection) | |
Comments | Criterion B |
Conducted interference | |
Standards/regulations | EN 61000-4-6 |
Conducted interference | |
Frequency range | 0.15 MHz ... 80 MHz (80% amplitude modulation with 1 kHz) |
Comments | Criterion A |
Voltage | 10 V |
Criteria | |
Criterion A | Normal operating behavior within the specified limits. |
Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Mounting type | DIN rail mounting |
Assembly instructions | To allow for air circulation, mount the device freestanding, with a clearance of at least one centimeter on all sides to other devices. |
Mounting position | Vertical (horizontal DIN rail) |
Não há comentários do produto ainda.
Avaliação: | |
Nome: | |
Email: | |
Título: | |
Opinión: | |
Você recomendaria esse produto para comprar? | |
Adicionar avaliação |
Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.