Produto adicionado com sucesso ao seu carrinho de compras
EM-CP-PP-ETH
2902802
PHOENIX_CONTACT
1
Comando de carregamento AC
O EV Charge Control é usado para carregar veículos elétricos em uma rede trifásica de corrente alternada de acordo com IEC 61851-1 Modo 3. Todas as funções de controle necessárias para isso estão integradas. Funções adicionais estão disponíveis para diferentes aplicações de carregamento.
EV charge control is used to charge electrical vehicles on the 3-phase AC mains power supply according to IEC 61851-1 Mode 3. All necessary control functions are integrated. Additional functions are available for various charging applications.
Mobilidade Eletrônica
Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT
Obrigado pelo seu interesse nos nossos artigos, esperamos que o prazo indicado seja conveniente para si.
Durante a preparação do pedido pode seleccionar o tipo de envío que melhor se adapte ás suas necessidades: Aéreo Express 24Hrs, Terrestre Standard 48/72Hrs, etc.
| Product type | AC charging controller |
| Product family | CHARX control advanced |
| Application | AC charging controller for commercial applications (EU) |
| Operating mode | Stand-Alone |
| Client | |
| Charging standard | Type 2 |
| Charging mode | Mode 3, Case B + C |
| Data management status | |
| Article revision | 15 |
| Charging controllers | |
| Number of charging points | 1 |
| Type of charging current | AC 3-phase |
| Current consumption | < 1 W |
| Locking release in the event of mains failure | With EM-EV-CLR-12V locking release module (Item No. 2903246) as an option |
| Supply | |
| Supply voltage | 230 V |
| Supply voltage range | 110 V AC ... 240 V AC (nominal voltage range) |
| 95 V AC ... 264 V AC | |
| Max. current consumption | 40 mA |
| Nominal power consumption | < 1 W (No-load) |
| Frequency range | 45 Hz ... 65 Hz |
| Digital | |
| Number of digital inputs | 4 |
| Frequency range | 50 Hz ... 60 Hz |
| Nominal current IN | ≤ 8 mA |
| Nominal input voltage UN | 24 V |
| Input voltage range U1 | -3 V ... 5 V (Off) |
| Input voltage range U2 | 15 V ... 30 V (On) |
| Digital | |
| Output name | 4 digital outputs |
| Connection technology | Screw connection |
| Maximum output voltage | 30 V |
| Maximum output current | 0.2 A (Total current for all outputs; internally supplied) |
| Maximum output current per channel | 0.6 A (Per output; externally supplied) |
| Digital | |
| Output name | Relay output V1.2 |
| Maximum switching voltage | 250 V AC |
| Max. switching current | 2 A |
| Switching | |
| Output name | Relay output C1.2 |
| Minimum switching capacity | 1500 VA |
| Maximum switching voltage | 250 V AC (External supply) |
| Max. switching current | 2 A |
| Switching | |
| Output name | Relay output R1.3and R2.4 |
| Minimum switching capacity | 180 VA |
| Maximum switching voltage | 30 V AC/DC (External supply) |
| Max. switching current | 2 A |
| Conductor connection | |
| Connection method | Screw connection |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Interface | Ethernet (1x) |
| RS-485 | |
| Interface | RS-485 2-wire |
| Bus system | RS-485 |
| Connection method | Screw connection |
| Number of interfaces | 1 |
| Number of supported devices | 1 |
| Transmission speed | 9.6 kbps (Standard) |
| Transmission speed range | 2.4 kbps ... 19.2 kbps (adjustable) |
| Data flow control/protocols | Modbus/RTU (slave) |
| Ethernet | |
| Interface | Ethernet |
| Bus system | RJ45 |
| Connection method | RJ45 jack |
| Number of interfaces | 1 |
| Serial transmission speed | 10/100 Mbps |
| Transmission length | max. 100 m (with shielded, twisted-pair data cable) |
| Protocols supported | Modbus/TCP |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 30 % ... 95 % (non-condensing) |
| Conformity/Approvals | |
| Conformance | CE-compliant |
| Electromagnetic compatibility | Conformance with EMC Directive 2004/108/EC |
| Low Voltage Directive | Conformance with LV directive 2006/95/EC |
| Noise immunity | EN 61000-6-2 |
| Housing | DIN 43880 |
| Noise emission | EN 61000-6-3 |
| Standards | |
| Standards/regulations | IEC 61851-1 |
| Mounting type | DIN rail mounting |
| Mounting position | any |
| Característica | Valor |
|---|---|
| Desbloqueio de emergência em caso de falta de energia (EF009316) | Sim |
| Número máximo pontos de carregamento controláveis (EF009156) | 1 |
| Com interface de comunicação (EF006609) | Sim |
| Largura (EF000008) | 71.6 mm |
| Altura (EF000040) | 90 mm |
| Profundidade (EF000049) | 61 mm |
| Título: | Tamanho: | Tipo: |
|---|---|---|
| PDF CATALOG PHOENIX CHARGING TECHNOLOGY ELECTROMOBILITY EN.pdf | 6 Mbytes |
|
| PHOENIX CONTACT-2902802-EM-CP-PP-ETH | 196 Kbytes |
![]() |
Não há comentários do produto ainda.
| Avaliação: |
|
| Nome: | |
| Email: | |
| Título: | |
| Opinión: | |
| Você recomendaria esse produto para comprar? | |
|
|
|
| Adicionar avaliação | |
Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.