PHOENIX_CONTACT SF-5EP1N8AAD00 1605512 - Imagem 1

As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

SF-5EP1N8AAD00 1605512 PHOENIX CONTACT Conectores de encaixe para equipamentos parede frontal

Referência: SF-5EP1N8AAD00

Código: 1605512

Fabricante: PHOENIX_CONTACT

Descrição:

Conectores de encaixe para equipamentos parede frontal
Conecte. ficha. para ser apar. parede frontal, Ângulo de rotação, para fechadura padrão e SPEEDCON, M23, número de polos: 5+PE, tipo de contato: Macho, O-ring axial, 4x Ø 3.2, blindado: sim, tamanho do flange: 26mm x 26mm, índice de proteção: IP67, número de polos: 6, tipo de conexão: Conexão crimpada, série: SF
Device connector front mounting, angled rotatable, for standard and SPEEDCON interlock, M23, number of positions: 5+PE, contact connection type: Pin, Axial O-ring, 4x Ø 3.2, shielded: yes, flange dimensions: 26 mm x 26 mm, number of positions: 6, connection method: Crimp connection, series: SF

Categorias:

  • Conectores > Condutor circular, de montagem (sem cabo)
  • PHOENIX_CONTACT > Conexão de dispositivos de campo

Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT

  • Mais informação
  • ETIM
  • PDF
  • Avaliações
Garantia, reparação e devolução.

Preço unitário: 19,95 €

Este preço é por unidade e mostra o valor líquido (excluindo impostos indirectos se aplicável).

Calcule o preço por quantidade

QuantidadePreço

Prazo padrão: 2-3 semanas.

  • Estes prazos são estimativos e podem variar uma vez tratado o pedido do artigo.

JÁ VISTOS

MAIS INFORMAÇÃO

Dados técnicos

Notes
Order information:Order crimp contacts 6 x Ø 2 mm separately
Safety note
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Mounting
Mounting typeFront mounting
Mounting4x Ø 3.2

Product properties
Product typeCircular connectors (device side)
SeriesSF
ApplicationPower
Number of positions6
Connection profile5+PE
Shieldedyes
CodingN
Thread typeM23
Data management status
Article revision07

Dimensions
Housing
Flange dimensions26 mm x 26 mm

Material specifications
Seal materialFPM
Housing materialTurned parts: copper zinc alloy (CuZn), die-cast parts: zinc (GD-Zn)
Insulator materialPA 6.6
Gasket and O-ring materialFPM

Electrical properties
Contact
Contact diameter2 mm
Max. current30 A
Nominal voltage UN630 V
Overvoltage categoryIII
Degree of pollution3
Rated surge voltage6 kV
Contact
Contact diameter2 mm
Overvoltage categoryIII
Degree of pollution3
Rated surge voltage4 kV

Connection data
Conductor connection
Connection methodCrimp connection
Contact connection typePin

Connector
Typeangled rotatable

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67
Ambient temperature (operation)-40 °C ... 125 °C
Ambient temperature (storage/transport)15 °C ... 25 °C
Altitude3000 m
Permissible humidity (storage/transport)50 % ... 65 %

ETIM for 1605512 Ligadores (EC002635)

Nome da característicaTipo de contacto (EF001587)
Valor da característicaOutro
Nome da característicaNúmero de contatos de dados (EF012232)
Valor da característica0
Nome da característicaNúmero de contatos de potência (EF012216)
Valor da característica0
Nome da característicaNúmero de contatos de controlo (EF012217)
Valor da característica6
Nome da característicaTemperatura ambiente (EF002386)
Valor da característica-40 °C
Nome da característicaTensão especificada de funcionamento (EF000228)
Valor da característica630 V
Nome da característicaAcabamento da conexão elétrica (EF003961)
Valor da característicaConexão por cravação
Nome da característicaTipo de fecho (EF000208)
Valor da característicaOutro
Nome da característicaCom condutor de proteção (EF007468)
Valor da característicaNão
Nome da característicaBlindado (EF000881)
Valor da característicaSim
Nome da característicaCom indicação de estado (EF001602)
Valor da característicaNão

DATASHEET - PDF

Últimas opiniões dos nossos clientes

Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.