PHOENIX_CONTACT SACCBP-MS-4CON-M16/1,0-PUR SCO 1419399 - Imagem 1

As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

SACCBP-MS-4CON-M16/1,0-PUR SCO 1419399 PHOENIX CONTACT Conector de montagem

Referência: SACCBP-MS-4CON-M16/1,0-PUR SCO

Código: 1419399

Fabricante: PHOENIX_CONTACT

Descrição:

Conector de montagem
Conecte. ficha. para ser apar. poster de parede., Universal, 4 polos, PUR, preto acinzentado RAL 7021, blindado, Conector macho, reto, M12-SPEEDCON, codificação: A, na extremidade livre do cabo, Montagem traseira, M16 x 1,5, Conexão do cabo, comprimento do cabo: 1 m, PUR preto sem halogênio, Produto alternativo de acordo com RoHS II sem exceção 6c (Pb< 0,1%) código do item: 1239252
Device connector rear mounting, Universal, 4-position, PUR, black-gray RAL 7021, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 1 m, PUR halogen-free black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239252

Categorias:

  • Conectores > Condutor circular, de montagem (com fios)
  • PHOENIX_CONTACT > Conexão de dispositivos de campo

Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT

  • Mais informação
  • ETIM
  • PDF
  • Avaliações
Garantia, reparação e devolução.

Preço unitário: 41,96 €

Este preço é por unidade e mostra o valor líquido (excluindo impostos indirectos se aplicável).

Calcule o preço por quantidade

QuantidadePreço

Prazo padrão: 2-3 semanas.

  • Estes prazos são estimativos e podem variar uma vez tratado o pedido do artigo.

JÁ VISTOS

MAIS INFORMAÇÃO

Dados técnicos

Notes
Notes on operationThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Order information:Lock nut is included in the scope of delivery
Safety note
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• Only use tools recommended by Phoenix Contact
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Mounting
Mounting typeRear mounting M16 x 1.5 With flat nut
Assembly noteWith flat nut

Product properties
Product typeCircular connectors (device side)
Sensor typeUniversal
Number of positions4
No. of cable outlets1
Shieldedyes
CodingA
Thread typeM12
Data management status
Article revision10
Insulation characteristics
Overvoltage categoryII
Degree of pollution3

Material specifications
Flammability rating according to UL 94V0
Seal materialNBR
Contact materialCuZn
Contact surface materialAu
Contact carrier materialPA 6.6
Material for screw connectionZinc die-cast, nickel-plated
Outer sheath, materialPUR

Electrical properties
Rated surge voltage2.5 kV
Contact resistance≤ 3 mΩ
Insulation resistance≥ 100 MΩ
Nominal voltage UN250 V
Nominal current IN4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Transmission mediumCopper

Connection data
Conductor connection
Connection methodCable connection
Contact connection typePin
Tightening torque3 Nm ... 4 Nm (Installation-side)

Mechanical properties
Mechanical data
Insertion/withdrawal cycles> 100

Connector
Connection 1
Head designPin
Head cable outletstraight
Head thread typeM12
Head locking typeSPEEDCON
CodingA
Connection 2
Head designfree cable end

Cable/line
Cable length1 m
PUR halogen-free black [PUR]
Desenho cotadobbckjhdtve.jpg
Cable weight36 kg/km
UL AWM Style20549 / 10493 (80°C/300 V)
Number of positions4
Shieldedyes
Cable typePUR halogen-free black [PUR]
Conductor structure signal line42x 0.10 mm
AWG signal line22
Conductor cross section4x 0.34 mm² (Signal line)
Wire diameter incl. insulation1.27 mm ±0.02 mm (Signal line)
External cable diameter4.95 mm ±0.2 mm
Outer sheath, materialPUR
External sheath, colorblack-gray RAL 7021
Conductor materialBare Cu litz wires
Material wire insulationPP
Single wire, colorbrown, white, blue, black
Thickness, insulation≥ 0.21 mm
Thickness, outer sheathapprox. 0.50 mm
Overall twist4 wires, twisted
Optical shield covering80 %
Max. conductor resistancemax. 58 Ω/km (at 20 °C)
Insulation resistance≥ 100 GΩ*km (at 20 °C)
Wave impedance≥ 62 Ω (f = 10 MHz)
Cable capacity≤ 80 pF/m (Conductor-Conductor)
≤ 135 pF/m (Wire/shield)
Nominal voltage, cable≤ 300 V
Test voltage≥ 3000 V
Minimum bending radius, fixed installation5 x D
Minimum bending radius, flexible installation10 x D
Smallest bending radius, fixed installation25 mm
Smallest bending radius, movable installation50 mm
Dynamic load capacity (bending)Max. bending cycles: 10000000, Bending radius: 10 x D, Traversing path: 10 m, Traversing rate: 3 m/s, Acceleration: 10 m/s²
Halogen-freein accordance with DIN VDE 0472 part 815
in accordance with DIN EN 50267-2-1
Flame resistancein accordance with UL 758/1581 FT2
DIN EN 60332-2-2 (20 s)
Resistance to oilin accordance with DIN EN 60811-2-1
Other resistanceHighly resistant to acids, alkaline solutions and solvents
hydrolysis and microbe resistant
Resistant to salt water
partly UV-resistant (in accordance with DIN EN ISO 4892-2-A)
abrasion-resistant
Special propertiesFlexible cable conduit capable
Silicone-free
Free of substances which would hinder coating with paint or varnish
Low adhesion surface
Ambient temperature (operation)-40 °C ... 80 °C (cable, fixed installation)
-25 °C ... 80 °C (Cable, flexible installation)

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67 (When plugged in)
IP65 (When plugged in)
IP65/IP67
Ambient temperature (operation)-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)

Standards and regulations
M12
Standard designationM12 connector
Standards/specificationsIEC 61076-2-101

ETIM for 1419399 Ligadores (EC002635)

Nome da característicaTipo de contacto (EF001587)
Valor da característicaOutro
Nome da característicaNúmero de contatos de dados (EF012232)
Valor da característica0
Nome da característicaNúmero de contatos de potência (EF012216)
Valor da característica0
Nome da característicaNúmero de contatos de controlo (EF012217)
Valor da característica4
Nome da característicaTipo de invólucro (EF006980)
Valor da característicaDireito
Nome da característicaCorrente nominal especificada In (EF008250)
Valor da característica4 A
Nome da característicaTemperatura ambiente (EF002386)
Valor da característica-25 °C
Nome da característicaTensão especificada de funcionamento (EF000228)
Valor da característica250 V
Nome da característicaCategoria de sobretensão (I, II, III ou IV) (EF006785)
Valor da característicaII
Nome da característicaGrau de poluição (1 a 4) (EF006786)
Valor da característica3
Nome da característicaMaterial da superfície de contato (EF004020)
Valor da característicaDourado
Nome da característicaMaterial da caixa protetora (EF001596)
Valor da característicaPlástico
Nome da característicaMaterial do anel roscado (EF012304)
Valor da característicaOutro
Nome da característicaTipo de fecho (EF000208)
Valor da característicaOutro
Nome da característicaClasse de inflamabilidade do material de selagem de acordo com UL 94 (EF002521)
Valor da característicaV0
Nome da característicaCom condutor de proteção (EF007468)
Valor da característicaNão
Nome da característicaGrau de proteção (IP), montado (EF007466)
Valor da característicaIP67
Nome da característicaMin. número de ciclos de inserção (EF012212)
Valor da característica100
Nome da característicaBlindado (EF000881)
Valor da característicaSim
Nome da característicaCom indicação de estado (EF001602)
Valor da característicaNão

Últimas opiniões dos nossos clientes

Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.