5/5 .
— CHE 06/05/26, 10:33
Produto:MTZ18-4VM DANFOSS REFRIGERATION Compress...

As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.
Referência: HC-M-HS-MOD-BU
Código: 1605001
Fabricante: PHOENIX_CONTACT
Descrição:
Categorias:
Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT
* Este artigo pode estar obsoleto. Se você estiver interessado, insira seu e-mail e informaremos se há unidades disponíveis. Caso não existam mais, um dos nossos técnicos procurará uma alternativa fornecivel com características semelhantes.
Vá para o produto alternativo:HC-M-02-AT-F-351417390
Solicite um orçamento e verificaremos a disponibilidade das unidades. Caso não estejam disponíveis, um dos nossos técnicos procurará uma solução alternativa.
| Note | For HEAVYCON HC-B6 to B48 housing (housing height: min. 72 mm), HC-M-MHR... hinged retaining frame required, axial connection for 4 mm Allen key |
|---|---|
| Rated voltage (III/3) | 1000 V |
| Rated current | 100 A |
| Rated surge voltage | 8 kV |
| Number of positions | 2 |
| Ambient temperature (operation) | -40 °C ... 125 °C |
|---|
| Conductor cross section | 16 mm² ... 35 mm² (The cross section specification refers to the geometric cross section of the cable used) |
|---|---|
| Connection cross section AWG | 4 ... 2 |
| Stripping length of the individual wire | 13 mm |
| Tightening torque | 6 Nm (16 mm²) |
| 7 Nm (25 mm²) | |
| 8 Nm (35 mm²) | |
| Wire diameter including insulation | 11.4 mm |
| Hexagonal socket | SW 4 |
| Insertion/withdrawal cycles | ≥ 500 |
| Minimum housing height | 72 mm |
| Series | HC-M-HS |
|---|---|
| Number of module slots | 2 |
| Connection method | Axial screw connection |
| Flammability rating according to UL 94 | V0 |
| Pollution degree | 3 |
| Overvoltage category | III |
| Assembly instructions | Use HC housing h >= 72 mm. Connection of the wires using a 4 mm. Allen wrench.Axial screw connection only for stranded wires.Plug-in connections may only be operated only when there is no load/voltage. |
| Connection | Note for axial connection methodThe specified conductor cross sections refer to the geometric cross section of the used conductor.The use of conductors with a geometric cross section that deviates greatly from the nominal cross section of the conductor should be checked first.The wiring space of the axial screw technology has been designed for fine strand conductors as per VDE 0295 class 5. Deviating conductor superstructures (e.g. class 6 conductors) must be checked before use.ConnectionIt must be ensured before installation that the ball screw is completely turned back (chamber is open). Twisting the conductors is not allowed. The cores must be pushed up to the end of the contact chamber (until the contact is insulated). Keep the core in this position and tighten it using an Allen key. The required core end must be cut before a reconnection. Tightening the connection screw is allowed only once in order to prevent a breakage of the litz wire. |
| Contact material | Copper alloy |
|---|---|
| Contact surface material | Ag |
| Contact carrier material | PC |
Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.
5/5 .
— CHE 06/05/26, 10:33
Produto:MTZ18-4VM DANFOSS REFRIGERATION Compress...
5/5 merci beaucoup
— sotitradim 29/11/25, 11:12
Produto:SL20,MNM,IP42,300lm,1H SL2MNM42H1C EATON...
4/5 a,azing to use it
— B rahul 04/10/25, 08:05
Produto:661601 LEGRAND URA21LED 70LM 1H IP42 NP
4/5 Amazing to use it
— B rahul 04/10/25, 08:04
Produto:661601 LEGRAND URA21LED 70LM 1H IP42 NP