Entrar
PHOENIX_CONTACTFontes de alimentaçãoQUINT-BUFFER/24DC/20 2866213 PHOENIX CONTACT Módulo de bateria de energia
PHOENIX_CONTACT QUINT-BUFFER/24DC/20 2866213 - Imagem 1

As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

QUINT-BUFFER/24DC/20 2866213 PHOENIX CONTACT Módulo de bateria de energia

Referência: QUINT-BUFFER/24DC/20

Código: 2866213

Fabricante: PHOENIX_CONTACT

Descrição:

Módulo de bateria de energia
Módulo tampão de 24 V DC/20 A, armazenamento de energia livre de manutenção baseado em capacitor. Entrada e saída desacopladas. Na área de download há, entre outras coisas, uma tabela de seleção claramente organizada com correntes de carga e tempos de buffer, bem como tempos de carregamento de acordo com o tempo de buffer.
Buffer module, 24 V DC/20 A, maintenance-free capacitor-based energy storage. Decoupled input and output. In the download area, there is a clearly arranged selection table available with load currents and buffer times, as well as charging times after buffer mode.

Categorias:

  • Material de instalação de redes de telecomunicações DNT / FNT > Acessórios para o SAI (Sistema de Alimentação Ininterrupta)
  • PHOENIX_CONTACT > Fontes de alimentação

Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT

  • Mais informação
  • ETIM
  • PDF
  • Avaliações
Garantia, reparação e devolução.

Preço unitário: 445,09 €

Este preço é por unidade e mostra o valor líquido (excluindo impostos indirectos se aplicável).

Calcule o preço por quantidade

QuantidadePreço

Prazo padrão: 2-3 semanas.

  • Estes prazos são estimativos e podem variar uma vez tratado o pedido do artigo.

MAIS INFORMAÇÃO

Dados técnicos
Input data
Input voltage24 V DC
Input voltage range22.5 V DC ... 30 V DC
Input voltage range DC22.5 V DC ... 30 V DC
Buffer period0.2 s (20 A)
4 s (1 A)
Current consumptionapprox. 0.1 A
0.6 A (charging process)
20.6 A (max.)
Reverse polarity protectionyes
Charging delayno
Fixed backup threshold< 22 V DC
Variable connect threshold(UIN- 1 V)/0.1 s
Protective circuitTransient surge protection; Suppressor diode, 35 V DC
Output data
Efficiency> 95 %
Nominal output voltage24 V DC (depending on the input voltage)
Setting range of the output voltage (USet)22 V DC ... 28.5 V DC
Nominal output current (IN)20 A
Output current limit27 A (buffer mode)
Bridging time200 ms
Feedback voltage resistance< 35 V DC (buffer mode)
Protection against overvoltage at the output (OVP)< 35 V DC
Residual ripple< 100 mVPP(buffer mode)
Output power480 W
Peak switching voltages nominal load< 100 mVPP(20 MHz)
Power dissipation2.5 W (ready at 27 A)
9.8 W (buffer mode at 27 A)
Protective circuitTransient surge protection; Suppressor diode, 35 V DC
Connection in parallelyes, for increasing the buffer time and for redundancy
Connection in seriesyes
Mains operation
Nominal output voltage24 V DC
Nominal output current (IN)20 A
Battery operation
Nominal output voltage24 V DC
Nominal output current (IN)20 A
Signal: Active (high = buffer module is loaded)
Output descriptionPower Good
Maximum switching voltage≤ 24 V
Output voltage+ 24 V
Continuous load current≤ 20 mA
Energy storage
Charging current500 mA
Nominal capacity0.1 Ah
Charging time< 27 s
Memory mediuminternal, capacity
IQ technologyno
Connection data
Input
Connection methodScrew connection
Conductor cross section, rigid min.0.5 mm²
Conductor cross section, rigid max.16 mm²
Conductor cross section flexible min.0.5 mm²
Conductor cross section flexible max.10 mm²
Conductor cross section AWG min.20
Conductor cross section AWG max.6
Stripping length10 mm
Screw threadM4
Tightening torque, min1.2 Nm
Tightening torque max1.5 Nm
Output
Connection methodScrew connection
Conductor cross section, rigid min.0.5 mm²
Conductor cross section, rigid max.16 mm²
Conductor cross section flexible min.0.5 mm²
Conductor cross section flexible max.10 mm²
Conductor cross section AWG min.20
Conductor cross section AWG max.6
Stripping length10 mm
Screw threadM4
Tightening torque, min1.2 Nm
Tightening torque max1.5 Nm
Signal
Conductor cross section, rigid min.0.2 mm²
Conductor cross section, rigid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Screw threadM3
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Signaling
Types of signalingLED
Active switching output
Operating voltage displayGreen LED
Signal output: Active (high = buffer module is loaded)
Status displayLED "Power Good", green
Note on status displayBuffer module is loaded: LED ON
Electrical properties
Insulation voltage input/output1 kV (routine test)
1 kV (type test)
Product properties
Product typeBuffer module
IQ technologyno
MTBF (IEC 61709, SN 29500)> 500000 h
Data management status
Article revision05
Insulation characteristics
Protection classIII
Degree of pollution2
Dimensions
Width64 mm
Height130 mm
Depth125 mm
Installation dimensions
Installation distance right/left5 mm / 5 mm
Installation distance top/bottom50 mm / 50 mm
Alternative assembly
Width122 mm
Height130 mm
Depth67 mm
Mounting
Mounting typeDIN rail mounting
Assembly notealignable: horizontally 0 mm, vertically 50 mm
Mounting positionhorizontal DIN rail NS 35, EN 60715
Material specifications
Housing materialMetal
Type of housingAluNox (AlMg1)
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-25 °C ... 70 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Maximum altitude≤ 2000 m
Climatic class3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)
Shock18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
15 Hz ... 150 Hz, 2.3g, 90 min.
Standards and regulations
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)
Standard - Electrical safetyEN 60950-1/VDE 0805 (SELV)
Standard – Safety extra-low voltageEN 60950-1 (SELV) and EN 60204 (PELV)
Standard - Safe isolationDIN VDE 0106-101
Standard - Safety of transformersEN 61558-2-17
Approvals
Shipbuilding approvalDNV GL (EMC A), ABS
UL approvalsUL/C-UL listed UL 508
UL/C-UL Recognized UL 60950-1
UL/C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D
EMC data
Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU
Low Voltage DirectiveConformance with Low Voltage Directive 2014/35/EC
Noise immunityEN 61000-6-2:2005
Noise emissionEN 55011 (EN 55022)
Electrostatic discharge
Standards/regulationsEN 61000-4-2
HousingLevel 4
Electrostatic discharge
Contact discharge8 kV
Discharge in air15 kV
CommentsCriterion B
Electromagnetic HF field
Standards/regulationsEN 61000-4-3
Electromagnetic HF field
Frequency range80 MHz ... 1 GHz
Test field strength10 V/m
CommentsCriterion A
Fast transients (burst)
Standards/regulationsEN 61000-4-4
Fast transients (burst)
Input2 kV (level 3 - asymmetrical: conductor to ground)
Output2 kV (level 3 - asymmetrical: conductor to ground)
Signal1 kV (level 2 - asymmetrical: conductor to ground)
CommentsCriterion B
Surge voltage load (surge)
Standards/regulationsEN 61000-4-5
Surge voltage load (surge)
Input/Output0.5 kV (level 1 - asymmetrical: conductor to ground)
Input/Output/Signal0.5 kV (level 1 - symmetrical: conductor to conductor)
Conducted interference
Standards/regulationsEN 61000-4-6
Conducted interference
I/O/SLevel 3
Frequency range0.15 MHz ... 80 MHz
CommentsCriterion A
Voltage10 V
Voltage dips
Standards/regulationsEN 61000-4-11
Emitted interference
Standards/regulationsEN 61000-6-3
Radio interference voltage in acc. with EN 55011EN 55011 (EN 55022) Class B, area of application: Industry and residential
Emitted radio interference in acc. with EN 55011EN 55011 (EN 55022) Class B, area of application: Industry and residential

ETIM for 2866213 Dados e telecomunicações (EC002850)

Nome da característicaTipo de acessório/peça de reposição (EF000215)
Valor da característicaOutro
Nome da característicaAcessório (EF013236)
Valor da característicaSim
Nome da característicaPeça de substituição (EF013237)
Valor da característicaNão
Nome da característicaLargura (EF000008)
Valor da característica64 mm
Nome da característicaAltura (EF000040)
Valor da característica130.05 mm
Nome da característicaProfundidade (EF000049)
Valor da característica131.75 mm

DATASHEET - PDF

Título
Tamanho
Tipo
PHOENIX CONTACT-2866213-QUINT-BUFFER/24DC/20
137 Kbytes
PDF CATALOG PHOENIX PROTECTION EN
27 Mbytes

Últimas opiniões dos nossos clientes

Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.