F3SP-U5P-TGR 153354 OMRON Controlador de Muting 4 Fotocélulas DIN 45mm

E3FS Safety sensors
Single-beam safety sensor in compact housing
The slender M18-sized E3FS is a type 2 safety single beam with an operating range of up to 10 m. Plastic and metal housing, cable and M12-connector offer flexibility in
application together with a control unit such as F3SP-U3P or F3SP-U5P.
• Sensing distance up to 10 m
• LEDs for easy alignment and diagnosis
• Cable and M12 plug categories
• Plastic and metal housing
• Type 2 sensor complying with EN 61496-1
Ordering information
Safety single beam sensors (Type 2) Controller for safety single beam sensors
Case material Operation distance Order code
Sensors Output contacts Width Order code
Plastic 0 to 10 m Cable type E3FS-10B4
Plug type E3FS-10B4-P1
Nickel brass Cable type E3FS-10B4-M Plug type E3FS-10B4-M1-M
1 to 2
Safety single beam sensors
1 to 4
Safety single beam sensors
2 NO 2.5 A 22.5 mm F3SP-U3P-TGR
45 mm F3SP-U5P-TGR
Specifications
Sensors
Sensing method Through-beam
Controller F3SP-U3P-TGR, F3SP-U5P-TGR Supply voltage (Vs) 24 VDC ± 10% (ripple p-p 10% max.) Effective aperture angle (EAA) ±5° (at 3 m)
Current consumption Emitter:50 mA max.
Receiver:25 mA max.
Sensing distance 10 m
Standard sensing object Opaque object: 11 mm min. in diameter
Response time 2.0 ms (E3FS only)
Control output PNP transistor output, load current: 100 mA max.
Test input (emitter) 21.5 to 24 VDC: Emitter OFF (source current: 3 mA max.)
Open or 0 to 2.5 V: Emitter ON (leakage current: 0.1 mA max.)
Ambient light intensity Incandescent lamp: 3.000 lx max. (light intensity on the receiver surface) Sunlight: 10,000 lx max. (light intensity on the receiver surface)
Ambient temperature Operating: -20°C +55°C, storage: -30°C +70°C (with no icing or condensation)
Degree of protection IP67 (IEC 60529)
Light source Infrared LED
Protection Output short-circuit protection, reverse polarity protection
Controllers
Item F3SP-U3P F3SP-U5P
Number of sensors 1 to 2 safety single beam sensor 1 to 4 safety single beam sensor
Width 22.5 mm 45 mm Muting input 2 Inputs 4 Inputs Safety related function Override function
Muting lamp connection
Interlock system (automatic and manual reset)
Power supply voltage 24 VDC ±10%
Power consumption 420 mA max.
Output contacts 2 NO 2.5 A (protected by fuse), 115 VAC max. 2 NO 2.5 A (protected by fuse), 250 VAC max.
Indicators 6 LED for status and diagnostics
Degree of protection IP20 (IEC 60529)
Terminal 16 screw terminals, detachable blocks with ’4pin’
Response time  30 ms
Ambient temperature Operation: –10°C +55°C
Housing material Plastic DIN rail mounting
32 screw terminals, detachable blocks with ’4pin’
488