Safety-door Switch D4GS-N Slim Safety-door Switches with IP67 Rating • The slim safety-door switches with a three-terminal contact construction. • Reversible design allowing either front or rear mount- ing. • Built-in switches with two- or three-terminal contact construction are available. • Operation Key with rubber mounting hole to absorb vibration and shock. Features Slim Safety-door Switches with 3-terminal Contact Construction Thin and 1/2 the size as OMRON’s previous models. Key Mounting Hole The key mounting hole is designed with rubber to absorb vibration and shock. 85 mm 30 mm 17 mm IP67 Degree of Protection (Applicable to main body only Operation Key insertion face meets IP00.) The D4GS-N uses rust-resistant materials and incorporates a drain opening as effective countermeasures against problems caused by water. Note: IP67 is based on the test method specified in EN60947-5-1. Be sure to confirm in advance the sealing performance under the actual operating Reversible Design Front and rear mounting are both possible. Built-in Switches Two- and three-terminal contact models are available. environment and conditions. Safety Standards Meeting EN (TÜV) Standards and CE marking requirements along with a variety of international standard requirements, such as UL and CSA requirements. All NC contacts satisfy requirements for the direct opening mechanism. Safety Zb contact Safety contact Auxiliary contact For safety category circuit For Programmable Controller input or indicator Note: The safety contacts are direct opening contacts approved by EN and each of them is indicated with the mark . D4GS-N G-163
Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.