CS1W-SCU21-V1 CS1W0383A CS1WSCU21V1,1 OMRON Módulo 2 RS232C

CS-Series communication units Rack PLC
Open to any communication, standard or user-defined
CS1 provides both standardised open networks interfaces, and cost efficient, high-
speed proprietary network links. Datalinks between PLCs, or to higher-level informa- tion systems can be made using Serial or Ethernet links, or the easy-to-use Controller Link network.
Omron supports the 2 major field networks, DeviceNet and PROFIBUS-DP. For high-
speed field I/O, Omron's own CompoBus/S offers an unsurpassed ease of installation. Fully user-configurable serial and CAN-based communication can be used to emulate a variety of application-specific protocols. EtherNet/IP units provide data link func- tions to share large amounts of data between PLCs. The PROFINET-IO controller to-
gether with the SmartSlice modular I/O system offers ethernet-based I/O with controller- and network redundancy.
Ordering information
Type Ports Protocols Unit class Remarks Connection type Order code
Serial 2 × RS-232C CompoWay/F, Host Link, NT link, Modbus, CPU bus unit – 9-pin D-Sub CS1W-SCU21-V1
User-defined
Serial 2 × RS-232C/RS-485 CompoWay/F, Host Link, NT link, Modbus, CPU bus unit – 9-pin D-Sub CS1W-SCU31-V1
User-defined
Serial 2 × RS-232C CompoWay/F, Host Link, NT link, Modbus, CPU option board – 9-pin D-Sub CS1W-SCB21-V1
User-defined
Serial 1 × RS-232C +
1 × RS-422/RS-485
CompoWay/F, Host Link, NT link, Modbus, CPU option board – 9-pin D-Sub CS1W-SCB41-V1
User-defined
GP-IB Master/Slave selectable GP-IB instrument communication
Ethernet 1 × 100 Base-Tx UDP, TCP/IP, FTP server,
SMTP (e-mail), SNTP (time adjust), FINS routing, socket service
Special I/O unit – GP-IB CS1W-GPI01
CPU bus unit – RJ45 CS1W-ETN21
Controller link 2-wire twisted pair Omron proprietary CPU bus unit – 2-wire screw + GND CS1W-CLK23
Optical HPCF – 2 × HPCF connector CS1W-CLK13
Optical graded-index fiber – 4 × ST connector CS1W-CLK53
EtherNet/IP 1 × 100 Base-Tx EtherNet/IP, UDP, TCP/IP, FTP server, SNTP, SNMP
CPU Bus unit 31 mm RJ45 CS1W-EIP21
DeviceNet 1 × CAN DeviceNet CPU bus unit – 5-p detachable CS1W-DRM21-V1
CompoNet 4-wire, data + power to slaves CompoNet (CIP-based) Special I/O unit – 4-p detachable IDC
CS1W-CRM21
(Master)
or screw
CompoBus/S 2-wire (Master) Omron proprietary Special I/O unit – 2-wire screw +
2-wire power
CS1W-SRM21
PROFIBUS-DP 1 × RS-485 (Master) DP, DPV1 CPU bus unit – 9-pin D-Sub CS1W-PRM21
CAN 1 × CAN CANopen, User-defined CPU bus unit – 5-p detachable CS1W-CORT21
PROFINET IO 1 × 100 Base-Tx
PROFINET IO controller
FINS UDP CPU bus unit – RJ45 CS1W-PNT21
PROFIBUS-DP 1 × RS-485 (Slave) DP C200H special
I/O unit
C200H units cannot be used on CS1D systems
9-pin D-Sub C200HW-PRT21
Accessories
Description Connection type Order code
RS-232C to RS-422/RS-485 signal converter. Mounts directly on serial port. 9-pin D-sub to screw clamp CJ1W-CIF11 terminals
Controller link PCI board with support software PCI, wired CLK 3G8F7-CLK23-E Controller link PCI board with support software PCI, HPCF connectors 3G8F7-CLK13-E Controller link PCI board with support software PCI, ST connectors 3G8F7-CLK53-E Controller link repeater unit (wire to wire) Screw - Screw CS1W-RPT01
Controller link repeater unit (wire to HPCF fiber) Screw - HPCF connector CS1W-RPT02
Controller link repeater unit (wire to graded-index glass fiber) Screw - ST connector CS1W-RPT03
PROFIBUS DP to RS-422/RS-485 Serial Gateway. User-configurable, with Omron protocols built-in. 9-pin D-sub to screw clamp PRT1-SCU11 terminals
PROFINET IO + ModBus/TCP to Modbus/RTU (RS-485) Gateway. 3 × RJ45 to screw clamp terminals
EJ1N-HFU-ETN
Note: For Ethernet Cables and Accessories, see page 81
43