OMRON EJ1C-EDUA-NFLK EJ1C1000H EJ1CEDUANFLK - Imagem 1

As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

EJ1C-EDUA-NFLK EJ1C1000H EJ1CEDUANFLK OMRON EJ1 Cabeçalho solar powe, Coms, Alarme

Referência: EJ1C-EDUA-NFLK

Código: EJ1C1000H

Número de catálogo: EJ1CEDUANFLK

Fabricante: OMRON

Descrição:

EJ1 Cabeçalho solar powe, Coms, Alarme
EJ1 Cabeceira Alim, Coms, Alarme

Categorias:

  • Controladores industriais (PLC) > Fonte de alimentação para sistema PLC
  • OMRON > Controlo Temperatura Panel > EJ1

Produto novo em sua embalagem original com todas as garantias e certificações de OMRON

  • Mais informação
  • ETIM
  • PDF
  • Avaliações
Garantia, reparação e devolução.

Preço unitário: 234,39 €

Este preço é por unidade e mostra o valor líquido (excluindo impostos indirectos se aplicável).

Calcule o preço por quantidade

QuantidadePreço

Prazo padrão: 2-3 dias.

  • Estes prazos são estimativos e podem variar uma vez tratado o pedido do artigo.

MAIS INFORMAÇÃO

Características

CelciuXº - Controlo da temperatura de múltiplos loops - Controlo e conectividade

O CelciuXº foi concebido para proporcionar comunicações fáceis, sem programação, com a Omron e PLC e HMI de terceiros. Acima de tudo, o CelciuXº (EJ1) incorpora todas as tecnologias de controlo de temperatura inteligente "fáceis de utilizar" como 2-PID, controlos de perturbações e diversas formas de sincronização.

  • Interfaces para uma vasta gama de redes industriais
  • Engenharia reduzida graças à comunicação sem programação, aos componentes activos inteligentes e à s bibliotecas de blocos de funções
  • Disponível com terminais de parafusos e terminais com grampos sem parafusos
  • Uma unidade controla vários tipos de entradas, tais como entradas Pt, termopar, mA, e de V

Applications

A solução perfeita para controlar ciclos múltiplos

Confiança, tamanho compacto e desempenho do controlo sem compromissos - o CelciuX° é a escolha perfeita para o controlo básico de ciclos múltiplos.

Controlo de máquina de ciclos múltiplos com hmi

Controlar, ter uma perspectiva geral e registar os dados não poderia ser mais fácil do que com o CelciuX° combinado com uma ligação directa aos HMI da Omron.

Ordering information

Type Control points Control outputs Auxiliary outputs Other functions Terminal Order code
Basic unit 2 2 voltage (pulse) 2 transistor (NPN)
2
For heating/cooling control applications, the auxiliary outputs on the 2-point models are used for cooling control.
On the 4-point models, heating/cooling control can be performed for two input points only.
2 CT input
2
When usingthe heater burnout alarm, purchase a Current Transformer (E54-CT1or E54-CT3) separately.
+ 2 event input
M3 screws EJ1N-TC2A-QNHB
Basic unit 2 2 voltage (pulse) 2 transistor (NPN)
2
For heating/cooling control applications, the auxiliary outputs on the 2-point models are used for cooling control.
On the 4-point models, heating/cooling control can be performed for two input points only.
2 CT input
2
When usingthe heater burnout alarm, purchase a Current Transformer (E54-CT1or E54-CT3) separately.
+2 event input
Screw-less clamp EJ1N-TC2B-QNHB
Basic unit 2 2 current 2 transistor (NPN)
2
For heating/cooling control applications, the auxiliary outputs on the 2-point models are used for cooling control.
On the 4-point models, heating/cooling control can be performed for two input points only.
2 event input M3 screws EJ1N-TC2A-CNB
Basic unit 2 2 current 2 transistor (NPN)
2
For heating/cooling control applications, the auxiliary outputs on the 2-point models are used for cooling control.
On the 4-point models, heating/cooling control can be performed for two input points only.
2 event input Screw-less clamp EJ1N-TC2B-CNB
Basic unit 4 4 voltage (pulse) – – M3 screws EJ1N-TC4A-QQ
Basic unit 4 4 voltage (pulse) – – Screw-less clamp EJ1N-TC4B-QQ
High function unit – – 4 transistor (NPN) 4 event input M3 screws EJ1N-HFUA-NFLK
High function unit – – 4 transistor (NPN) 4 event input Screw-less clamp EJ1N-HFUB-NFLK
DeviceNet unit – – – – Screw connector EJ1N-HFUB-DRT
Ethernet unit
2
This unit mounts to the left of the CelciuX° (EJ1) configuration and enables PROFINET or Modbus/TCP network connection.
Combine the HFU-ETN with an EDU_-NFLK end unit to use with other devices supporting Modbus-RTU like E5_N temperature controllers and MX2 Inverters.
– – – – 3 x RJ45 EJ1N-HFU-ETN
End unit
2
An End unitis always required for connection to a Basic unit or an HFU. AnHFU cannot operate without a Basic unit.
– – 2 transistor (NPN) – M3 screws EJ1C-EDUA-NFLK
End unit
2
An End unitis always required for connection to a Basic unit or an HFU. AnHFU cannot operate without a Basic unit.
– – 2 transistor (NPN) – Removable Connector EJ1C-EDUC-NFLK

Accessories

Currenttransformer

Diameter Order code
5.8 dia. E54-CT1
12.0 dia. E54-CT3

Communications and cables

Description Order code
G3ZA connecting cable 5 meter EJ1C-CBLA050
USB programming cable E58-CIFQ1
PC based configuration and tuning softwareCX-Thermo EST2-2C-MV4
PROFIBUS Gateway PRT1-SCU11

Specifications

Item Type EJ1_-TC2 EJ1_-TC4
Power supplyvoltage 24 VDC
Operatingvoltage range 85% to 110% of rated voltage
Power consumption 4 W max. (at maximum load) 5 W max. (at maximum load)
Input (seenote)
2
Inputs are fully multi-input. Therefore, platinum resistancethermometer, thermocouple, infrared thermosensor, and analog inputcan be selected.
Thermocouple: K, J, T, E, L, U, N, R, S, B, W, PLII
ES1B Infrared Thermosensor: 10 to 70°C, 60 to 120°C, 115 to 165°C, 140 to 260°C.
Analog input: 4 to 20 mA, 0 to 20 mA, 1 to 5 V, 0 to 5 V, 0 to 10 VPlatinumresistance thermometer: Pt100, JPt100
Input impedance Current input: 150Ω max., voltageinput: 1 MΩ min.
Controloutputs Voltage output Output voltage: 12 VDC ±15%, max.load current: 21 mA (PNP models with short-circuit protection circuit)
Transistor output Max. operating voltage: 30 V, max.load current: 100 mA –
Current output Current output range: 4 to 20 mA or 0 to 20mA DCLoad: 500 Ω max. (including transfer output)(Resolution: Approx:2,800 for 4 to 20 mA DC, approx. 3,500 for 0 to 20 mA DC) –
Event inputs Input points 2 –
Contact input ON: 1 kΩ max., OFF. 100 kΩ min. –
Non-contact input ON: Residual voltage: 1.5 V max.,OFF: Leakage current: 0.1 mA max. –
Outflow current: approx. 4 mA per point –
Number ofinput and control points Input points: 2, control points: 2 Input points: 4, control points: 4
Setting method Via communications
Control method ON/OFF control or 2-PID (withautotuning, selftuning, Heat & Cool autotuning and non-linearcool output selection)
Other functions Two-point input shift, digital input filter, remote SP, SP ramp, manual manipulated variable,
manipulated variable limiter, interference overshoot adjustment, loop burnout alarm, RUN/STOP, banks, I/O allocations, etc.
Alarm output 2 points via End unit
Communication RS-485, PROFIBUS, Modbus, DeviceNet RS-485, PROFIBUS, Modbus, DeviceNet
Size in mm(W×H×D) 31×96×109
Weight 180 g
Ambient temperaturerange Operating –10 to 55°C, Storage–25 to 65°C (with no icing or condensation)
Ambient humidityrange Operating 25% to 85% (with nocondensation)

Dimensions

Item Size in mm (H×W×D)
EJ1N-HFU_-NFL_ 95.4×31.0×104.9/109.0
EJ1N-HFUB-DRT 90.9×31.0×82.2
EJ1C-EDU 95.4×15.7×76.2/79.7

ETIM for 225933 PLC´s (EC000599)

Nome da característicaTipo de tensão (tensão de entrada) (EF003033)
Valor da característicaDC
Nome da característicaTipo de tensão de saída (EF008222)
Valor da característicaDC
Nome da característicaRedundância (EF003156)
Valor da característicaNão
Nome da característicaAdequado para funções de segurança (EF001597)
Valor da característicaNão
Nome da característicaLargura (EF000008)
Valor da característica15.7 mm
Nome da característicaAltura (EF000040)
Valor da característica95.4 mm
Nome da característicaProfundidade (EF000049)
Valor da característica79.7 mm
Nome da característicaTensão de saída DC (EF007001)
Valor da característica24 V
Nome da característicaTensão de entrada em DC (intervalo) (EF007120)
Valor da característica20.4 V

Últimas opiniões dos nossos clientes

Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.