EASY-E4-DC-12TC1P 197506 Y7-197506 EATON ELECTRIC Nano Easy E4 Controller Dispositivo Base 24 V DC 8 ED 4 SD..

Eaton Moeller® series EASY Control relay

197506

4015081940844

58 mm

90 mm

72 mm

0.2 kg

Eaton supports the product until its end of life

IEC 60068-2-6
EN 55022
IEC/EN 61000-4-2
IEC 60068-2-27
EN 55011
IEC/EN 61000-4
UL Listed
UL Category Control No.: NRAQ, NRAQ7
IEC/EN 61131-2
IEC 60068-2-30
EN 61010
IEC/EN 61000-6-3
IEC/EN 61000-6-2
EN 50178
UL File No.: E205091
DNV GL
CE
UL hazardous location class I
UL hazardous location division 2
UL hazardous location group A (acetylene)
UL hazardous location group B (hydrogen)
UL hazardous location group C (ethylene)
UL hazardous location group D (propane)

Accuracy of the real-time clock depending on ambient air temperature - fluctuations of up to ± 5 s/day (± 0.5 h⁄year) are possible

EASY-E4-DC-12TC1P

easyE4 base device

Expandable
Networkable (Ethernet)
Parallel connection of transistor outputs with resistive load, inductive load with external suppressor circuit, combination within a group - Group 1 Q1 to Q4

8 kV

The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.

Is the panel builder's responsibility.

Is the panel builder's responsibility.

The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Meets the product standard's requirements.

Meets the product standard's requirements.

Meets the product standard's requirements.

Meets the product standard's requirements.

Meets the product standard's requirements.

Does not apply, since the entire switchgear needs to be evaluated.

Does not apply, since the entire switchgear needs to be evaluated.

Meets the product standard's requirements.

Meets the product standard's requirements.

Meets the product standard's requirements.

Does not apply, since the entire switchgear needs to be evaluated.

Does not apply, since the entire switchgear needs to be evaluated.

Is the panel builder's responsibility.

Is the panel builder's responsibility.

Is the panel builder's responsibility.

Is the panel builder's responsibility.

Is the panel builder's responsibility.

CAT5

Display
Timer
Keypad
Real time clock

Depending on the suppressor circuit (Inductive load to EN 60947-5-1, With external suppressor circuit, Max. switching frequency, max. duty factor)
Dependent on the cycle time of the basic device

2

± 2 s/day, Real-time clock to inputs (± 0.2 h⁄Year)
± 1 %, Repetition accuracy of timing relays (of values)
± 2 %, (I7, I8) ± 0.12 V, of actual value, within a single device (Analog Inputs)
± 3 %, of actual value, two easy devices (Analog Inputs)

2 kV, Signal cable
2 kV, Supply cable
According to IEC/EN 61000-4-4

easyE4

795 - 1080 hPa (operation)

None

Condensation: prevent with appropriate measures
Clearance in air and creepage distances according to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201

LCD-display used as Output status indication of Transistor outputs
LCD-display used as status indication of Digital inputs 24 V DC

Voltage (DC)

Max. 2.5 V (at status 0 per channel, transistor outputs)
U = Uₑ - 1 V (signal 1 at Iₑ = 0.5 A, transistor outputs)

None

Top-hat rail fixing (according to IEC/EN 60715, 35 mm)
Screw fixing using fixing brackets ZB4-101-GF1 (accessories)
Front build in possible
Rail mounting possible

DC

Vertical
Horizontal

Voltage
Current
4 Transistor Outputs
Parallel connection of max. 2 Transistor outputs

6 kV

No

None

None

55 °C

-25 °C

70 °C

-40 °C

0.5 A

0 W

0 W

0 W

0.3 m

1

0

0

0

0

0

0

0

0

III

100 % (Inductive load to EN 60947-5-1, With external suppressor circuit)
100 % (Inductive load to EN 60947-5-1, Without external suppressor circuit, DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H)
100 % (Inductive load to EN 60947-5-1, Without external suppressor circuit, T0.95 = 15 ms, R = 48 Ω, L = 0.24 H)

EASYSOFT-SWLIC/easySoft7

0.5 kV, Supply cables, symmetrical, EASY…DC, power pulses (Surge), EMC
1 kV, Supply cables, asymmetrical, power pulses (Surge), EMC
According to IEC/EN 61000-4-5 Level 4

30 m, screened, Analog inputs
100 m, unscreened, Digital inputs 12 V DC
100 m, unscreened, Digital inputs 24 V AC

Each CPU cycle, Analog inputs

1 V/m at 2 - 2.7 GHz (according to IEC EN 61000-4-3)
10 V/m at 0.08 - 1.0 GHz (according to IEC EN 61000-4-3)
3 V/m at 1.4 - 2 GHz (according to IEC EN 61000-4-3)

Monochrome

Yes (Caution: A short circuit will result if 0 V or earth is applied to the outputs in the event that the supply voltage is connected to the wrong poles.)

4

Ethernet: RJ45 plug, 8-pole
Push in terminals

50 mm Drop height, Drop to IEC/EN 60068-2-31

10 V (according to IEC/EN 61000-4-6)

Class B (EN 61000-6-3)

4

10/100 MBit/s

5 - 95 % (IEC 60068-2-30, IEC 60068-2-78)

IP20

39 ms typ., Digital Inputs 100 - 240 V AC 50 Hz (I1 - I8), Delay time from 1 to 0, Debounce OFF
32 ms typ., Digital Inputs 100 - 240 V AC 60 Hz (I1 - I8), Delay time from 1 to 0, Debounce OFF
80 ms, Digital inputs 115/230 V AC 50 Hz (I7, I8), Delay time from 0 to 1, Debounce ON
0.5 ms typ., Digital Inputs 100 - 240 V DC (I1 - I8), Delay time from 1 to 0, Debounce OFF
39 ms typ., Digital Inputs 100 - 240 V AC 50 Hz (I1 - I8), Delay time from 0 to 1, Debounce OFF
32 ms typ., Digital Inputs 100 - 240 V AC 60 Hz (I1 - I8), Delay time from 0 to 1, Debounce OFF
0.5 ms typ., Digital Inputs 100 - 240 V DC (I1 - I8), Delay time from 0 to 1, Debounce OFF

0.1 mA (on signal "1" per channel)

5 % (transistor outputs)
≤ 5 %

1:1 (Pulse pause ratio)
10 kHz, Counter frequency
≤ 20 m (cable length, screened)
-2147483648 - 2147483647 (value range)
Square (pulse shape)
Number: 4 (I1, I2, I3, I4 - Digital inputs 24 V DC)

Max. 0.5 A at signal „1” DC per channel

According to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201

Thermal cutout

Pulse shape: Square
Signal offset: 90°
Counter frequency: ≤ 5 kHz
Number of counter inputs: 2 (I1 + I2, I3 + I4)
Pulse pause ratio: 1:1
Value range: -2147483648 to +2147483647

6.8 A, Transistor outputs

According to IEC/EN 60068-2-6
10 - 57 Hz, 0.15 mm constant amplitude
57 - 150 Hz, 2 g constant acceleration

Cable length: ≤ 20 m (screened)

13.3 kΩ

80 mA

15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 18 Impacts

Pulse shape: Square (digital inputs 24 V DC)
Cable length: ≤ 20 m (screened, Digital inputs 24 V DC)
Counter frequency: 5 kHz (Digital inputs 24 V DC)
Number: 4 (I1, I2, I3, I4 - Digital inputs 24 V DC)
Pulse pause ratio: 1:1 (Digital inputs 24 V DC)

Signal 0: ≤ 5 V DC (I1 - I8, Digital inputs, 24 V DC)

0.7 ≤ Ie ≤ 1.7 per output, For Ra ≤ 10 mΩ, Depending on number of active channels and their load, Transistor outputs

0 - 10 V DC, Analog inputs

0.25 (Inductive load to EN 60947-5-1, Without external suppressor circuit, T0.95 = 15 ms, R = 48 Ω, L = 0.24 H)
1 (Inductive load to EN 60947-5-1, With external suppressor circuit)
0.25 (Inductive load to EN 60947-5-1, Without external suppressor circuit, DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H)

Between Analog inputs and Digital inputs: no
Between Transistor outputs: no

4
8

2 W

≤ 10 ms, Bridging voltage dips

MODBUS
TCP/IP

0

0

2 W

0 VAC

0 VAC

0 VAC

0 VAC

28.8 VDC

20.4 VDC

0.5 A

Control relays easyE4

2 W

20.4 - 28.8 V DC
20.4 - 28.8 V DC (Transistor outputs)
24 V DC (-15 %/+ 20 % - power supply)
24 V DC (transistor outputs)
24 V DC (digital inputs)

≥ 1A (T), Fuse, Power supply
Yes, electronic (Q1 - Q4), Transistor outputs

0.2 - 2.5 mm² (22 - 12 AWG), flexible with ferrule
0.2 - 4 mm² (AWG 22 - 12), solid