PD60CNK18BPM5T CARLO GAVAZZI Parametri selezionati SISTEMA Sensore di colore CUSTODIA rettangolare DISTANZA ..

Photoelectrics, Fibre Optic Sensor
Contrast Sensor
Type PD 60 CNK 18 BP ..
• Range: 18 mm ±2 mm
• Microprocessor controlled and EEPROM parameter storage
• Operational voltage 10 - 30 V DC
• Output 100 mA, NPN and PNP
• Light or dark switching selectable
• Cable or M8 standard plug
• IP65 protection
• cUL and CE approved
• Manual contrast set-up
Product Description
Ordering Key
PD60CNK18BPM5T
The PD60CNK18BP.. is a fibre optic amplifier made specifi- cally for plastic fibres to detect contrast. The sensor is micro- processor-based and features manual distance setup by keyboard. NO or NC (light or dark mode) output is select- able by wiring. The sensor
Type Selection
output is built as a Push-pull output that performs both a NPN and a PNP output, which are fully protected against short-circuit, transients and wrong polarity. The sensor is built in a strong 13 x 30 x 60 mm polycarbonate housing for DIN-rail mounting.
Type
Housing style Housing size Housing material Not used
Plastic fibres
Sensing distance mm
Output type
Output configuration Connection type Teach-in
Housing Range Ordering no. Ordering no.
W x H x D Sn NPN and PNP cable NPN and PNP plug
13 x 30 x 60 mm 18 mm ±2 mm PD 60 CNK 18 BP T PD 60 CNK 18 BP M5 T
Fibre 100 cm fibre w. M18 lens head FPDK01SCC100
To be ordered separately.
Specifications
Detection distance 18 mm ±2 mm Temperature drift < 0,4%/°C Rated operational volt. (UB ) 10 to 30 VDC
(ripple included)
Ripple (Urpp ) £ 10%
Output current
Continuous (Ie) 100 mA Short-time (I) 100 mA
No load supply current (Io) 50 mA
Switching frequency 20 kHz
Response time
OFF-ON (tON) £ 25 ms
ON-OFF (tOFF) £ 25 ms
Power ON delay (tv) £ 300 ms
Output function
NPN and PNP Available (Push-Pull output)
Indication function
Insufficient contrast Both green LED and red key flash for 2 s
Short-circuit output Both green LED and red key flash continuously
Voltage drop (Ud )
IL = 100 mA £ 2 VDC IL = 10 mA £ 1 VDC
Protection Short-circuit, reverse pola- rity, transients
Light source White LED
Spot diameter @18 mm 1.5 mm (FPDK01SCC100)
Modulation frequency 40 kHz
Ambient light
Incandescent light 10’000 Lux
Sunlight 20’000 Lux
Environment
Installation category II (IEC 60664/60664A60947-1) Pollution degree 3 (IEC 60664/60664A60947-1) Degree of protection IP 65 (IEC 60529 60947-1)
Temperature
Operating 0° to +40°C (32° to +104°F) Storage -20° to +80°C (-4° to +176°F)
Vibration 10 to 150 Hz, 0.5 mm/7.5 g
(IEC60068-2-6)
Shock 2 x 1 m & 100 x 0.5 m
(IEC 60068-2-6, 60068-2-32)
Specifications are subject to change without notice (13.09.2010) 1