BEL-PIR90 CARLO GAVAZZI Parametri selezionati Altro INFO1 PIR rilevatore INFO2 ELKO INFO3 Alimentato dal Bus..

PIR Sensor
BEL-PIR90
Passive infrared detector (PIR) Detects movement by e.g. a person
Indoor applications Smart-house output Operating distance: 0 - 10 m Operating angle: 90° (10 m)
Walk test: LED indication on I/O 5
Channel coding by BGP-COD-BAT Supplied by smart-house
Delivered with pre-programmed addresses on I/O 1 and I/O 5
GENERAL SPECIFICATIONS
Channel programming BGP-COD-BAT
Channel assignment Three freely programmable channels
I/O 1: pre-programmed to
address N6
I/O 2: Not programmed I/O 5: pre-programmed to address N6
Power ON delay Typ. 1 min. It is therefore advisable to keep the unit connected to smart-house
Walk test indication LED, red
Environment
Degree of protection IP 40 For indoor applications
Operating temperature -10° to +50°C (+14° to +122°F)
Storage temperature -30° to +70°C (-22° to +158°F)
Connection Screw terminals
Max. wires in terminals 4 x 0.75 mm2
Terminal D+. Smart-house signal
Terminal D- Smart-house signal
Material
Housing Colour Off-white
Lens Polyethylene
Dimensions (WxHxD) 84 x 84 x 48 mm
Weight Approx. 150 g
INPUT SPECIFICATIONS
Inputs PIR on I/O 1
Lens Dual detecting zones
Segments 24
Levels 3
Angle 90°
Operating distance ≤ 10 m (see radiation diagram)
Wave length 7 to 14 µm
Input detection speed 0.5 to 5 pulses/s
Default channel status
Switch OFF (Position P) NO Switch ON (Position A) NC
I/O number 2 Status signal (Allways active when a channel is coded ti I/O 2)
SUPPLY SPECIFICATIONS
Power supply Supplied by smart-house
Rated operational current
LED OFF < 1.5 mA Rated operational current
LED ON < 3.0 mA
WIRING DIAGRAM
D+
TYPE SELECTION
Supply Ordering no.
By smart-house BEL-PIR90
DIMENSIONS
30 18 84
D-
D+ D- 84
All dimensions in mm
Specifications are subject to change without notice (26.11.2008) - A product of the CARLO GAVAZZI Group